The Goodman 0130F00010S Flame Sensor is the critical "eye" and safety "brain" of your gas furnace’s combustion system. This stainless steel probe is responsible for detecting the presence of a flame immediately after the gas valve opens. By sending a microamp signal back to the furnace control board, it confirms that a safe ignition has occurred. Specifically engineered for Goodman, Amana, and Janitrol furnace series, this sensor prevents hazardous "delayed ignition" or gas buildup by signaling the system to shut down instantly if a flame is not detected within seconds. As a genuine OEM component, it ensures your heating system operates with the precise electrical sensitivity required by factory safety protocols.

Key Features and Function:

• Precision Combustion Monitoring: Calibrated to transmit a steady microamp (µA) signal to the integrated furnace control, ensuring the gas valve remains open only during safe operation.
• Genuine OEM Reliability/Fitment: Features the exact porcelain insulator and offset bracket geometry required for a "drop-in" installation in Goodman burner assemblies.
• High-Temperature Stainless Steel Build: Constructed from premium-grade alloys to withstand the intense, direct heat of the burner flame without warping or rapid carbon buildup.
• Safety Integration: Directly resolves the common "Short Cycling" issue where a furnace fires for a few seconds and then shuts down due to lack of flame confirmation.

Product Details and Key Specifications:

• Part Number: 0130F00010S (Replaces 0130F00010)
• Manufacturer: Goodman / Amana (Genuine OEM)
• Part Type: Furnace Flame Sensor (Flame Rod)
• Material: Stainless Steel Probe / High-Dielectric Porcelain Insulator
• Connector: 1/4" Male Quick-Connect Terminal
• Mounting: Single-hole Offset Bracket
• Shipping Weight: 0.2 lbs

🛠️ HVAC Depot Pro Tip: The "Clean vs. Replace" Check

If your furnace fires for 2 to 5 seconds and then cuts out, you likely have a dirty 0130F00010S sensor. Over time, "silica" or carbon buildup creates an invisible coating that head-insulates the probe. During your Diagnostic Check, you can attempt to clean the rod with a very fine abrasive like a dollar bill or a light scouring pad—never use heavy sandpaper, as it creates grooves that collect even more carbon. If the porcelain insulator is cracked or the rod is pitted, cleaning will not work; a full replacement is required to restore the safety signal.

Cross-Reference & Compatibility:

The 0130F00010S is a direct OEM replacement for the following part numbers:

• OEM Numbers: 0130F00010, 0130F00010S, B1172606
• Aftermarket Cross: B11726-06, PSE-G10, 20488501
• White-Rodgers: 760-401

Extensive Model Compatibility List:

Note: Use 'CTRL+F' to search for your specific model:

• Goodman GMS8 Series:

   GMS80403AN, GMS80603AN, GMS80804BN, GMS81005CN

• Goodman GDS8 Series:

   GDS80403AX, GDS80603AX, GDS80804BX, GDS81005CX

• Goodman GMH95 Series:

   GMH950453BX, GMH950703BX, GMH950904CX

• Amana AMES8 Series:

   AMES80403AN, AMES80603AN, AMES80804BN

• Janitrol GMP Series:

   GMP050-3, GMP075-3, GMP100-3, GMP125-4

• Package Units:

   GPG, GPH, APG series gas heat sections.