{"title":"HVAC Installation Materials","description":"","products":[{"product_id":"nu-calgon-4290-75-nu-blast-high-pressure-condenser-coil-cleaner-18-oz-aerosol","title":"Nu-Calgon 4290-75 – Nu-Blast High-Pressure Condenser Coil Cleaner (18 oz. Aerosol)","description":"\u003cp\u003eThe \u003cstrong\u003eNu-Calgon 4290-75 (Nu-Blast®)\u003c\/strong\u003e is a professional-grade \u003cstrong\u003eHigh-Pressure Condenser Coil Cleaner\u003c\/strong\u003e designed for rapid, \"no-rinse\" maintenance of outdoor air-cooled condensers. This powerful aerosol solvent is specifically engineered to blast through stubborn grease, oil, and grime that standard water-based cleaners leave behind, restoring heat transfer efficiency in seconds. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFormulated with a non-conductive, non-flammable solvent base, \u003cstrong\u003eNu-Blast®\u003c\/strong\u003e features an ultra-high-pressure spray pattern that physically dislodges debris from deep within the coil fins. Because the solvent evaporates quickly, it requires \u003cstrong\u003eno water rinsing\u003c\/strong\u003e, making it the ideal solution for rooftop units, cell towers, and remote equipment where water access is limited. Its heavy-duty degreasing chemistry is particularly effective on \"kitchen-exhaust\" fouled coils found on restaurant rooftops. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: High-Pressure Blasting Action:\u003c\/strong\u003e Forceful spray penetrates thick fin packs to push dirt out the other side without the need for a pressure washer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: No-Rinse Solvent Formula:\u003c\/strong\u003e Evaporates completely after cleaning, saving time and eliminating the need for bulky water hoses on rooftops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Non-Conductive \u0026amp; Non-Flammable:\u003c\/strong\u003e Safe for use around electrical components and sensitive HVAC circuitry while the unit is powered down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Industrial Strength Degreaser:\u003c\/strong\u003e Specifically breaks down petroleum-based oils and kitchen greases that cause catastrophic head pressure spikes. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 4290-75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Nu-Calgon (Genuine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Aerosol Condenser Coil Cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan Size:\u003c\/strong\u003e 18 Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent Type:\u003c\/strong\u003e Non-Aqueous \/ Non-Flammable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.5 lbs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Back-to-Front\" Blast\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the best results, always spray Nu-Blast® from the inside of the condenser coil pushing outward. This forces the dirt back out the way it came in, rather than packing it deeper into the fins. Since it requires no rinsing, it’s perfect for a \"quick-hit\" service call where you need to drop high head pressures immediately without dragging out a 50-foot hose. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e4290-75\u003c\/strong\u003e is a premium alternative to traditional liquid concentrates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Refs:\u003c\/strong\u003e Nu-Blast, 429075, High-Pressure Coil Wash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential AC condensers, commercial rooftop units (RTUs), refrigeration racks, and micro-channel coils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Nu-Blast","offers":[{"title":"Default Title","offer_id":52451488203115,"sku":"681001429009","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_fe4e7f0f-a15c-4808-a279-313dc601918e.png?v=1760124041"},{"product_id":"micro-plus-mp-lsc5-copper-line-set-cover-with-cap-5-x-4-x-5-x-10-professional-grade-pvc-white","title":"Micro-Plus MP-LSC5 Copper Line Set Cover with Cap 5\" x 4\" x 5\" x 10' Professional Grade PVC White","description":"\u003ch1\u003eMicro-Plus MP-LSC5 Copper Line Set Cover with Cap 5\" x 4\" x 5\" x 10' Professional Grade PVC White\u003c\/h1\u003e\n\u003cp\u003eThe MP-LSC5 is a premium Micro-Plus heavy-duty line set cover system, acting as the critical protective \"armor\" for your HVAC refrigerant lines, power cables, and drain hoses. This professional-grade 10-foot section functions as the system's brain for exterior management, shielding sensitive insulation from UV degradation, rain, and physical damage caused by pets or landscaping equipment. Specifically engineered for high-efficiency mini-split and central air installations, the MP-LSC5 ensures your exterior finish remains clean and professional while preventing the thermal energy loss that occurs when insulation is exposed to the elements. \u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Micro-Plus Part Number MP-LSC5:\u003c\/strong\u003e Guaranteed professional-grade fit featuring a snap-together design that simplifies installation and maintenance access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 5\" x 4\" High-Capacity Profile:\u003c\/strong\u003e Specifically designed to house multiple line sets, oversized insulation, and communication wiring in a single, clean channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminate Deterioration and Noise Issues:\u003c\/strong\u003e Replaces exposed, unsightly tape and zip ties that become brittle over time, preventing vibrating lines from rattling against the exterior wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced UV Safety Monitoring:\u003c\/strong\u003e Manufactured from high-impact, UV-stabilized PVC that resists chalking and cracking even in direct sunlight and extreme temperature swings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Integrated End Cap:\u003c\/strong\u003e Features a precision-molded cap to prevent pests, debris, and moisture from entering the channel at the termination point. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Micro-Plus \/ Rectorseal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Micro-Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MP-LSC5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-Stabilized High-Impact PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5\" Width x 4\" Depth x 5\" Cap x 10' Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White (Paintable to match home exterior)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Residential and Commercial HVAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -4°F to 140°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.5 lbs per 10' stick \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ HVAC Depot Pro Tip\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTake a Picture First —\u003c\/strong\u003e Before snapping the cover into place, photograph the line set, flare connections, and wiring within the channel. Once the cover is closed, these components are hidden, and having a visual reference of the insulation condition and drain pitch is invaluable for future diagnostic checks. When mounting to the wall, ensure you use rust-resistant masonry or siding screws every 2 feet to prevent the heavy 10-foot section from sagging or pulling away during heavy wind. Always leave a small gap at the bottom of the end cap for any incidental condensation to drain freely.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperseded Parts:\u003c\/strong\u003e MP-LSC5-8, MPLSC5-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Drawing Numbers:\u003c\/strong\u003e 83015, 83011, 83012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Brands:\u003c\/strong\u003e Fortress 122-LSC5, Slimduct SD-100, SpeediChannel 230-D5, DiversiTech SpeediChannel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eModel Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Zone Mini-Split\u003c\/strong\u003e (Suffixes: 9k, 12k, 18k, 24k, 30k, 36k BTU)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Zone Systems\u003c\/strong\u003e (Suffixes: Dual, Tri, Quad Zone Line Sets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral AC Units\u003c\/strong\u003e (Suffixes: 1.5 Ton to 5 Ton Refrigerant Lines)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Pump Series\u003c\/strong\u003e (Suffixes: Cold Climate and High-Efficiency Models) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rheem","offers":[{"title":"Default Title","offer_id":52451496165739,"sku":"662766532491","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_be88a674-ffbb-45fd-9ca1-99198cf0cba8.png?v=1760124145"},{"product_id":"trane-american-standard-pan02343-drain-pan-32-x-66-heavy-gauge-steel-welded-corners-steel-nipples","title":"Trane American Standard PAN02343 Drain Pan | 32\" x 66\" Heavy Gauge Steel | Welded Corners \u0026 Steel Nipples","description":"\u003ch1\u003eTrane American Standard PAN02343 Drain Pan | 32\" x 66\" Heavy Gauge Steel | Welded Corners \u0026amp; Steel Nipples\u003c\/h1\u003e\n\u003cp\u003eProtect your property from costly water damage with the \u003cstrong\u003eTrane PAN02343 Drain Pan\u003c\/strong\u003e, the heavy-duty \"safety net\" for your high-capacity HVAC system. As the primary condensate collection point, this pan is engineered to manage the high volume of moisture generated by larger Trane and American Standard commercial and residential units. Built from heavy-gauge galvanized steel with expertly \u003cstrong\u003ewelded corners\u003c\/strong\u003e, it eliminates the leak risks associated with folded or seamed alternatives. This pan is a critical component in ensuring the structural integrity of your installation, specifically supporting the \u003cstrong\u003eTWE and Odyssey series\u003c\/strong\u003e air handlers where precision drainage is paramount.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak-Proof Welded Construction:\u003c\/strong\u003e Unlike standard pans, the \u003cstrong\u003ePAN02343\u003c\/strong\u003e features fully welded corners and steel nipples to ensure a watertight seal that stands up to years of thermal expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Gauge Steel Durability:\u003c\/strong\u003e Constructed from industrial-grade galvanized steel, providing superior corrosion resistance and the rigidity needed to support heavy evaporator coils without sagging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Precision Fit:\u003c\/strong\u003e Designed as a factory-authorized Trane\/American Standard part, guaranteeing the correct slope for efficient condensate runoff and preventing stagnant water buildup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Capacity Drainage:\u003c\/strong\u003e Includes pre-installed steel nipples for secure plumbing connections, reducing the risk of \"relay-style\" moisture overflow that can lead to mold or ceiling damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Reduction Properties:\u003c\/strong\u003e The heavy-duty steel construction acts as a natural dampener, reducing the vibration and \"oil-canning\" noise often found in thinner, cheaper aftermarket pans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Trane \/ American Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Trane Technologies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PAN02343\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32\" Width x 66\" Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Heavy Gauge Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Welded Corners \/ Steel Nipples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Condensate Drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e ~28.5 lbs (Heavy-Duty Shipping)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ HVAC Depot Pro Tip\u003c\/h2\u003e\n\u003cp\u003eWhen installing a large-format pan like the \u003cstrong\u003ePAN02343\u003c\/strong\u003e, always perform a \"Pitch Check\" before securing the unit. Use a level to ensure the pan has a slight 1\/8\" per foot slope toward the drain outlet. \u003cstrong\u003eTake a picture of the pan's interior\u003c\/strong\u003e after the first few hours of operation to verify that no \"dry spots\" or standing puddles remain. To prevent future service calls, we recommend installing a secondary Float Switch directly onto the pan's edge to shut down the system if a primary drain line clog occurs.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference\u003c\/h2\u003e\n\u003cp\u003eThis pan is a standard replacement for several legacy and industrial configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperseded Part:\u003c\/strong\u003e PAN3243\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing Numbers:\u003c\/strong\u003e D330925G01, B144677P01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Equivalents:\u003c\/strong\u003e 30-PAN02343, TRN-PAN02343\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite-Rodgers \/ Emerson Equivalents:\u003c\/strong\u003e N\/A (Standardized Mechanical Component)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eModel Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis drain pan is compatible with high-capacity air handlers and evaporator coils. Grouped by base model for easy searching:\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTrane \/ American Standard TWE Series\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTWE240\u003c\/strong\u003e (Suffixes: 43BAA, 43CAA, 43DAA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTWE180\u003c\/strong\u003e (Suffixes: BD00AA, BC00AA, BE00AA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eOdyssey \/ Voyager Commercial Units\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTTA180\u003c\/strong\u003e (Suffixes: 400A, 400B, 400C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTWA180\u003c\/strong\u003e (Suffixes: 300A, 300B, 400B)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trane \/ American Standard","offers":[{"title":"Default Title","offer_id":52451496493419,"sku":"PAN02343-TRN-WELDED","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_6c6ca5b9-4329-4a76-a2e2-9f3c5aec8cc3.jpg?v=1760124151"},{"product_id":"honeywell-damper-control-panel-hz322-3-zone-conventional-heat-pump","title":"Honeywell Damper Control Panel HZ322 | 3-Zone Conventional \u0026 Heat Pump","description":"\u003ch1\u003eHoneywell Home HZ322\/U TrueZone™ Panel – Genuine OEM 3-Zone Conventional and Heat Pump Control 24V\u003c\/h1\u003e\n\u003cp\u003eThe Honeywell Home HZ322\/U TrueZone™ Panel serves as the sophisticated \"brain\" for multi-zone residential HVAC systems. This central controller orchestrates the complex communication between up to three independent thermostats and your central heating and cooling equipment. Designed for both conventional systems (up to 2 Heat\/2 Cool) and Heat Pump applications (2 Heat\/1 Cool), the HZ322\/U ensures that airflow is precisely directed only to the areas of the home calling for conditioning. By managing damper positions and equipment staging, it optimizes comfort while significantly reducing energy waste in unoccupied rooms. \u003c\/p\u003e\n\u003ch2\u003eKey Features and Function:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Multi-Zone Management:\u003c\/strong\u003e Independently controls up to 3 separate zones, ensuring tailored comfort levels across different floors or wings of a home.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine OEM TrueZone™ Reliability:\u003c\/strong\u003e Features Honeywell’s industry-leading robust construction with a digital display that simplifies setup and provides real-time system status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Safety \u0026amp; Equipment Protection:\u003c\/strong\u003e Includes a built-in Discharge Air Temperature (DATS) sensor logic to prevent coil freeze-ups or heat exchanger overheating during low-airflow conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Wiring:\u003c\/strong\u003e Utilizes push-terminals for tool-free wiring and a common-sense layout that reduces installation time and eliminates wiring errors. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e HZ322\/U (Replaces HZ322)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Honeywell Home \/ Resideo (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e 3-Zone Forced Air Zone Control Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\/SKU:\u003c\/strong\u003e 085267297967 \/ HZ322U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 VAC, 60 Hz (Requires 40VA or 75VA Transformer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Conventional (2H\/2C) or Heat Pump (2H\/1C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ Hertz:\u003c\/strong\u003e Single-phase (1PH) \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount or snap-track compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 3.5 lbs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ HVAC Depot Pro Tip: Check the Transformer VA\u003c\/h2\u003e\n\u003cp\u003eWhen installing the HZ322\/U, always calculate the total VA draw of your dampers and thermostats. A standard 40VA transformer may be insufficient if you are running multiple power-open\/power-close dampers; in these cases, upgrading to a \u003cstrong\u003e75VA transformer\u003c\/strong\u003e prevents the panel from \"brown-out\" resets during heavy demand. Also, always install the DATS (Discharge Air Temperature Sensor) to ensure the panel can safely stage down equipment if a single small zone is the only one calling for air. \u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility:\u003c\/h2\u003e\n\u003cp\u003eThe HZ322\/U is a direct OEM replacement or upgrade for the following part numbers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e HZ322, HZ311 (Upgrade), MM-2, MM-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Honeywell:\u003c\/strong\u003e TZ-3, TZ-4 (Check wiring compatibility)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52451502752107,"sku":"HZ322","price":195.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_f8f90b06-c08b-4808-8dfb-4abb33c713be.png?v=1760124244"},{"product_id":"k-flex-6rx068078-insul-tube-180-genuine-oem-7-8-id-x-3-4-wall-x-72-black-pipe-insulation","title":"K-Flex 6RX068078 Insul-Tube 180 – Genuine OEM 7\/8\" ID x 3\/4\" Wall x 72\" Black Pipe Insulation","description":"\u003ch1\u003eK-Flex 6RX068078 Insul-Tube 180 – Genuine OEM 7\/8\" ID x 3\/4\" Wall x 72\" Black Pipe Insulation\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eK-Flex 6RX068078 Insul-Tube 180\u003c\/strong\u003e is a professional-grade closed-cell flexible elastomeric foam insulation designed to serve as the thermal \"shield\" for your HVAC and refrigeration piping. This 7\/8\" ID tube is specifically engineered to control condensation and prevent energy loss on cold-water plumbing, chilled water lines, and refrigerant suction lines. By maintaining a high resistance to moisture vapor and heat transfer, the Insul-Tube 180 ensures that your furnace and A\/C series operate at peak factory efficiency. As a genuine K-Flex OEM product, it features a 3\/4\" wall thickness that provides superior thermal performance and protection against pipe freezing in residential and commercial applications.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Function:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Thermal Management:\u003c\/strong\u003e High-resistance closed-cell structure prevents heat gain or loss, ensuring refrigerant stays at the correct temperature for the compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine OEM Reliability\/Fitment:\u003c\/strong\u003e Flexible, slip-on design allows for easy installation over 7\/8\" copper piping, conforming to bends and elbows without compromising insulation value.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Condensation Control:\u003c\/strong\u003e The non-porous elastomeric foam acts as an integrated vapor retarder, eliminating the \"sweating\" that leads to mold growth and water damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Durability:\u003c\/strong\u003e Fiber-free, dust-free, and mold-resistant material ensures a long-lasting, clean installation in plenums and mechanical rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 6RX068078 (Insul-Tube 180)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e K-Flex USA (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Flexible Pipe Insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (ID):\u003c\/strong\u003e 7\/8\" (Fits 7\/8\" OD Pipe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 72\" (6 Feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Material:\u003c\/strong\u003e Black \/ Closed-Cell Elastomeric Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -297°F to +220°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Rating:\u003c\/strong\u003e 25\/50 Rated (ASTM E84)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ HVAC Depot Pro Tip: Seal Your Seams\u003c\/h2\u003e\n\u003cp\u003eTo ensure the \u003cstrong\u003e6RX068078\u003c\/strong\u003e provides a 100% vapor seal, always use a high-quality \u003cstrong\u003eK-Flex Contact Adhesive\u003c\/strong\u003e or specialized foam tape at all butt joints and longitudinal seams. Even the best insulation will fail to prevent condensation if air can reach the cold pipe surface. During your \u003cstrong\u003eDiagnostic Check\u003c\/strong\u003e, look for compressed sections of old insulation; if the foam has lost its thickness, it has lost its R-value and must be replaced to prevent the system from overworking.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility:\u003c\/h2\u003e\n\u003cp\u003eThe 6RX068078 is a direct OEM replacement for the following part numbers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e 6RX068078, 6X068078, 7\/8X3\/4 Pipe Insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmacell \/ Armaflex:\u003c\/strong\u003e APT07834\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAeroflex:\u003c\/strong\u003e Aerocel 7\/8\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e 078-34-R (7\/8\" ID x 3\/4\" Wall)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List:\u003c\/h2\u003e\n\u003cp\u003eNote: Use 'CTRL+F' to search for your specific copper pipe size:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\/8\" Copper Tubing:\u003c\/strong\u003e Standard suction line for 2.5 Ton, 3 Ton, and 3.5 Ton AC units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Set Applications:\u003c\/strong\u003e Fits most residential split-system refrigerant lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChilled Water Systems:\u003c\/strong\u003e Compatible with commercial 7\/8\" liquid delivery lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot Water Plumbing:\u003c\/strong\u003e Suitable for 7\/8\" lines up to 220°F to prevent heat loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Kflex","offers":[{"title":"Default Title","offer_id":52451503964523,"sku":"663117448709","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_a7b72030-718a-49e0-b26a-124dfba6dc7b.png?v=1760124271"},{"product_id":"malco-mshc1-dual-sided-cleanable-2-reversible-hex-driver-5-16-and-3-8","title":"Malco MSHC1 – Dual-Sided Cleanable 2\" Reversible Hex Driver (5\/16\" and 3\/8\")","description":"\u003cp\u003eThe \u003cstrong\u003eMalco® MSHC1\u003c\/strong\u003e is a professional-grade \u003cstrong\u003eDual-Sided Reversible Hex Driver\u003c\/strong\u003e engineered for the demanding environments of HVAC, roofing, and siding installation. This 2-inch impact-rated driver eliminates the need for multiple nut drivers by offering the two most common hex sizes—\u003cstrong\u003e5\/16\" and 3\/8\"\u003c\/strong\u003e—in a single, high-torque tool. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for use with cordless impact drivers, the \u003cstrong\u003eMSHC1\u003c\/strong\u003e features a unique reversible socket design that allows for instantaneous size changes. The \"Cleanable\" feature is a game-changer for technicians: the magnet can be easily slid back to wipe away metal shavings and \"swarf\" that typically clog standard drivers and cause stripped screw heads. Its industrial-strength magnet ensures a secure grip on fasteners, even in overhead or hard-to-reach applications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: 2-in-1 Reversible Design:\u003c\/strong\u003e Switch between 5\/16\" and 3\/8\" hex sizes in seconds without removing the shank from your drill chuck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Easy-Clean Magnet:\u003c\/strong\u003e Slide the socket to clear out metal debris, maintaining a deep, consistent seat for every fastener.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Impact Rated Durability:\u003c\/strong\u003e Manufactured from heat-treated steel to withstand the high-torque output of modern 1\/4\" impact drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Slim-Profile Socket:\u003c\/strong\u003e Designed to fit into tight corners and narrow channels where standard bulky nut drivers cannot reach. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e MSHC1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Malco® Products (Genuine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Sizes:\u003c\/strong\u003e 5\/16 Inch and 3\/8 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length:\u003c\/strong\u003e 2 Inches (50.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e 1\/4\" Hex Power Groove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Type:\u003c\/strong\u003e Rare Earth Neodymium (Cleanable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hardened S2 Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.15 lbs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Swarf\" Wipe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe #1 cause of rounded-off screw heads is metal shavings sitting in the bottom of your nut driver. With the MSHC1, you don't need a compressor to clean your bit. Simply pop the socket off, wipe the magnet with your glove, and click it back on. Doing this once a day will double the life of your driver and prevent frustrating \"spin-outs\" on the job. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMSHC1\u003c\/strong\u003e is the industry-standard reversible driver and replaces or complements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Variants:\u003c\/strong\u003e MSHC (1\/4\" \u0026amp; 5\/16\" version), MSHC2 (Longer 4\" version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Ideal for heavy-duty self-tapping screws, gas valve manifold screws, and condenser fan motor bolts. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HVAC Depot","offers":[{"title":"Default Title","offer_id":52451508748651,"sku":"686046551319","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_e19cef54-9b87-4262-91ca-f8c52fc0838b.jpg?v=1760124367"},{"product_id":"trane-gkt03850-combustion-blower-gasket-high-temp-fiber","title":"Trane GKT03850 Combustion Blower Gasket High-Temp Fiber","description":"\u003ch1 font-size=\"h5,,h4,,h2\" font-weight=\"bold\" class=\"Box-sc-1z9git-0 LTumJ\"\u003eCombustion Blower Gasket, GKT03850\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eGKT03850 is an official OEM Combustion Blower Gasket for Trane HVAC equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eX21010097010\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Trane Gasket can be used with the following Trane Model Numbers:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYSJ072A3SAM03P0C0A1B0A0A0010A000000000B0\u003cbr\u003eYSJ090A4SAL02B0C00000A0000000000000000B0\u003cbr\u003eYSJ090A4SAL02D0C0A10000020000000000000B0\u003cbr\u003eYSJ090A4SAL02P2E0C1A0A0000000000000000B0\u003cbr\u003eYSJ090A4SAL03K2E0A1B100040100000000000B0\u003cbr\u003eYSJ090A4SAL0200D0000000000000000000000B0\u003cbr\u003eYSJ090A4SAL03K0E0A0A0A0020000000000000B0\u003cbr\u003eYSJ090A4SAL03P0B0A1B000C20000000000000B0\u003cbr\u003eYSJ090A4SAL04C000A1B000A00000000000000B0\u003cbr\u003eYSJ072A4SAM02D2B0A1A0A0000100000000000B0\u003cbr\u003eYSJ090A3SAL03A0C0A1B000000000000000000B0\u003cbr\u003eYSJ090A3SAL03B0B0A100A0B00100000000000B0\u003cbr\u003eYSJ090A3SAL02P2E0A1B1A0040100000000000B0\u003cbr\u003eYHJ072AWSAM03H0E0A10100000000000000000B0\u003cbr\u003eYSJ072A3SAM02P0C0A0A1A0C00000000000000B0\u003cbr\u003eYSJ072A4SAM02R0E0A1A000000000000000000B0\u003cbr\u003eYSJ072A3SAM02D0B000000000000A000000000B0\u003cbr\u003eYSJ072A3SAM03K0B0A100A0A00000000000000B0\u003cbr\u003eYSJ090A3SAL0200C00000A000000A000000000B0\u003cbr\u003eYSJ072AWSAM00F000000000000000000000000B0\u003cbr\u003eYSJ072A4SAM04D0C0C1B00000000A000000000B0\u003cbr\u003eYSJ090A3SAL03H0B0A1B0A0000000000000000B0\u003cbr\u003eYSJ090A3SAL03H2A0C1B300020100000000000B0\u003cbr\u003eYHJ090A4SAL03H0E1A1A000C00000000000000B0\u003cbr\u003eYSJ090A4SAL03P2D0A1B1A0A20000000000000B0\u003cbr\u003eYSJ072A3SAM03R000A1A000A00000000000000B0\u003cbr\u003eYSJ072A3SAM02H0C0C1B00000010A000000000B0\u003cbr\u003eYHJ090A4SAL04M0C000010002010A000000000B0\u003cbr\u003eYSJ072A4SAM02G2E0A1B1A0C4010A000000000B0\u003cbr\u003eYSJ090A4SAL02D0C0A1B0A000010A000000000B0\u003cbr\u003eYSJ102A4SAL02H0C00001A000000A000000000B0\u003cbr\u003eYSJ090A3SAL02G2C0C1A1A0C00000000000000B0\u003cbr\u003eYHJ072A4SAM03D0C1C10000000000000000000B0\u003cbr\u003eYSJ090A3SAL03K0C0A101A0040100000000000B0\u003cbr\u003eYSJ090A4SAL03K0E0A0A000020000000000000B0\u003cbr\u003eYHJ072A4SAM03G0E0A2A100B00100000000000B0\u003cbr\u003eYSJ090AWSAL03E0D0A1A100010000000000000B0\u003cbr\u003eYSJ072A4SAM00F0A0000000000000000000000B0\u003cbr\u003eYSJ072A4SAM03P0C0A1A0A000000A000000000B0\u003cbr\u003eYSJ090A3SAL02M2E0C1A0A002000A000000000B0\u003cbr\u003eYSJ090A4SAL03D0C0A00100020000000000000B0\u003cbr\u003eYSJ090A4SAL01G2E0A1B1A0A40100000000000B0\u003cbr\u003eYSJ072A4SAM0402B0A1B1A004000A000000000B0\u003cbr\u003eYHJ102A3SAL03P2C0A1A1A0C20000000000000B0\u003cbr\u003eYSJ090A4SAL03K0E0A000A002000A000000000B0\u003cbr\u003eYHJ072A3SAM02H0C00000A0000000000000000B0\u003cbr\u003eYHJ090A3SAL04C0E0A1A0A0000000000000000B0\u003cbr\u003eYSJ090A4SAL02C0C0A200A002000A000000000B0\u003cbr\u003eYSJ090A4SAL04D0B00000A0000000000000000B0\u003cbr\u003eYSJ090A4SAL03P0C0A1A0A000000A000000000B0\u003cbr\u003eYSJ102A4SAL03F0C0A1B100020100000000000B0\u003cbr\u003eYSJ072A4SAM0200A0A1A000000000000000000B0\u003cbr\u003eYSJ072A3SAM01D2E0A0A100000100000000000B0\u003cbr\u003eYSJ102A3SAL03F0C0000000000000000000000B0\u003cbr\u003eYSJ072A3SAM03C2B0A1B0A0A2000A000000000B0\u003cbr\u003eYSJ102A4SAL03P0E0C1A0A0000000000000000B0\u003cbr\u003eYSJ072A3SAM03K2E0C1010000000A000000000B0\u003cbr\u003eYSJ072A4SAM03H000A103A0A2000A000000000B0\u003cbr\u003eYSJ102A3SAL03P0C0A1B100020100000000000B0\u003cbr\u003eYSJ090A4SAL03F0C00000A0000000000000000B0\u003cbr\u003eYSJ072A3SAM03H0A0A101A0A40000000000000B0\u003cbr\u003eYSJ102A4SAL0200D0000000000000000000000B0\u003cbr\u003eYHJ090A4SAL02D000A1A0A0000000000000000B0\u003cbr\u003eYSJ072A3SAM00D0C1000000000000000000000B0\u003cbr\u003eYSJ090A4SAL03F0C0A1B100020100000000000B0\u003cbr\u003eYSJ072A3SAM03H0C0C1A0A0C00100000000000B0\u003cbr\u003eYSJ102A3SAL04P2C0A1B1A0C0010A000000000B0\u003cbr\u003eYSJ072A3SAM03G0A0A1B3A0A1000A000000000B0\u003cbr\u003eYSJ102A3SAL01K000000000000000000000000B0\u003cbr\u003eYSJ102A3SAL03P4C0C1B30004000A000000000B0\u003cbr\u003eYSJ072A4SAM03R2E0C2A100040000000000000B0\u003cbr\u003eYSJ102A3SAL04H4C0A2B300A400AA000000000B0\u003cbr\u003eYSJ090A4SAL03H0C0A1A0A0040100000000000B0\u003cbr\u003eYSJ072A4SAM03D4E0A1A000000000000000000B0\u003cbr\u003eYSJ072A4SAM03G0C0C0A0A0000000000000000B0\u003cbr\u003eYSJ072A3SAM02H0E0A2A1A002000A000000000B0\u003cbr\u003eYSJ072A3SAM03F4C0C1A30004010A000000000B0\u003cbr\u003eYSJ102A3SAL03G0A0A1B3A0A1000A000000000B0\u003cbr\u003eYSJ090A3SAL03F2C1A2A3A00400A0000000000B0\u003cbr\u003eYSJ090A3SAL03H0E0A001A0000000000000000B0\u003cbr\u003eYSJ102A4SAL03H0D0A2B000A000A0000000000B0\u003cbr\u003eYSJ090A3SAL02C0B0C1B0A0000000000000000B0\u003cbr\u003eYSJ090A3SAL0200B0C2B1000101A0000000000B0\u003cbr\u003eYHJ090A4SAL02R2B0A2B100A00000000000000B0\u003cbr\u003eYSJ090A4SAL02H0C0A2A00000010A000000000B0\u003cbr\u003eYSJ090A4SAL03D0C0A000A0020000000000000B0\u003cbr\u003eYSJ072A4SAM02F0A0000000000000000000000B0\u003cbr\u003eYSJ090A4SAL0200C0A200A002000A000000000B0\u003cbr\u003eYSJ072A4SAM02D0E0A1A000000000000000000B0\u003cbr\u003eYSJ090A4SAL02K4C0A00000000000000000000B0\u003cbr\u003eYSJ072A3SAM03P0C0A200A0010100000000000B0\u003cbr\u003eYSJ072A3SAM03G2E1A1B1A0C4010A000000000B0\u003cbr\u003eYSJ090A4SAL02G0C0A100A0A00000000000000B0\u003cbr\u003eYSJ090A3SAL02G2A0A10100020100000000000B0\u003cbr\u003eYSJ072A3SAM03K2E0A1B100C2010A000000000B0\u003cbr\u003eYSJ102A4SAL03D0E0A1A1A0000000000000000B0\u003cbr\u003eYSJ090A3SAL03P2E0A1B1A004010A000000000B0\u003cbr\u003eYSJ072A3SAM02H2A0A10100020100000000000B0\u003cbr\u003eYSJ072A4SAM02C0E0A1A000000000000000000B0\u003cbr\u003eYSJ090A4SAL03D0E0A1A1A0000000000000000B0\u003c\/span\u003e\u003c\/p\u003e","brand":"Trane","offers":[{"title":"Default Title","offer_id":52451512779115,"sku":"GKT03850","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/GKT03850.jpg?v=1770328729"},{"product_id":"nu-calgon-4291-90-nu-brite-4x-ultra-concentrate-condenser-coil-cleaner-1-quart","title":"Nu-Calgon 4291-90 – Nu-Brite 4X Ultra-Concentrate Condenser Coil Cleaner (1 Quart)","description":"\u003ch1\u003eNu-Calgon 4291-90 – Nu-Brite® 4X Ultra-Concentrate Condenser Coil Cleaner (1 Quart)\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eNu-Calgon 4291-90 (Nu-Brite® 4X)\u003c\/strong\u003e is a high-performance, \u003cstrong\u003eNon-Acid Alkaline Condenser Coil Cleaner\u003c\/strong\u003e delivered in a space-saving ultra-concentrate format. This professional-grade solution provides the same industrial-strength cleaning and brightening power as the classic \"Blue\" Nu-Brite, but in a refined 4X formula that allows one quart to do the work of a full gallon of standard concentrate.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUtilizing a specialized surfactant and alkaline builder system, \u003cstrong\u003eNu-Brite® 4X\u003c\/strong\u003e produces a dense, expanding foam that physically pushes deeply embedded soil, grease, and oxidation out of the fin packs. It is specifically engineered for air-cooled condensers, cutting through the stubborn \"baked-on\" grime found on outdoor units. The formula provides the superior \"brightening\" results typically associated with hazardous hydrofluoric acid cleaners, but with a much safer, non-acid chemical profile.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: 4X Ultra-Concentrate Efficiency:\u003c\/strong\u003e One 32 oz. bottle mixes with water to create 1 gallon of standard concentrate, reducing storage space and shipping weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: High-Foaming Alkaline Action:\u003c\/strong\u003e Expanding foam penetrates thick coils to lift and remove grease, cottonwood, and heavy dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Non-Acid Fin Brightener:\u003c\/strong\u003e Safely restores the original \"bright\" look of aluminum fins, maximizing heat transfer and lowering system head pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Advanced Degreasing Power:\u003c\/strong\u003e Specifically designed to emulsify petroleum-based oils and environmental films that trap dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 4291-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Nu-Calgon (Genuine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e 4X Concentrate Liquid Coil Cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottle Size:\u003c\/strong\u003e 1 Quart (32 Ounces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Ratio:\u003c\/strong\u003e Add 1 quart of 4X to 3 quarts of water to make 1 gallon of standard concentrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse Required:\u003c\/strong\u003e Yes (Thorough Water Rinse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Outdoor Air-Cooled Condensers ONLY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 2.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Dilution Math\"\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eTo use this with a standard 4:1 pump sprayer, first mix the entire quart of 4291-90 with 3 quarts of water in a separate container to create \"standard\" Nu-Brite. Then, use that mixture as you normally would. This 4X version is a lifesaver for technicians who have limited van space but need the heavy-duty cleaning power for multiple commercial rooftop units.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e4291-90\u003c\/strong\u003e is the compact version of the industry-standard blue cleaner:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Refs:\u003c\/strong\u003e Nu-Brite 4X, 429190, Blue Coil Cleaner Concentrate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential condensers, commercial RTUs, and heavy-duty refrigeration racks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nu-Brite","offers":[{"title":"Default Title","offer_id":52451512975723,"sku":"681001429191","price":34.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/NC-4291-92.jpg?v=1770329514"},{"product_id":"nu-brite-coil-nu-calgon-4291-18-nu-brite-non-acid-alkaline-condenser-coil-cleaner-18-oz-aerosol-18oz-4291-18","title":"Nu-Calgon 4291-18 – Nu-Brite Non-Acid Alkaline Condenser Coil Cleaner (18 oz. Aerosol)","description":"\u003ch1\u003eNu-Calgon 4291-18 – Nu-Brite® Non-Acid Alkaline Condenser Coil Cleaner (18 oz. Aerosol)\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eNu-Calgon 4291-18 (Nu-Brite®)\u003c\/strong\u003e is a high-performance \u003cstrong\u003eAlkaline-Based Condenser Coil Cleaner\u003c\/strong\u003e specifically formulated to provide the brightening and cleaning power of an acid without the associated safety risks. This professional-strength aerosol is the industry standard for removing stubborn \"baked-on\" grease, oxidation, and outdoor contaminants from air-cooled condensers, restoring peak cooling efficiency.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUtilizing a specialized surfactant and alkaline builder system, \u003cstrong\u003eNu-Brite®\u003c\/strong\u003e creates a high-foaming action that physically pushes dirt and grime out from deep within the fin packs. Unlike standard cleaners, this aerosol version offers targeted application for smaller residential units or specific \"hot spots\" on commercial coils. It effectively cuts through greasy films and brightens aluminum fins, ensuring maximum heat transfer and lower head pressures during extreme summer heat.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: High-Foaming Alkaline Action:\u003c\/strong\u003e The expanding foam lifts and pushes soil out of the coil, cleaning areas that a standard spray cannot reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Non-Acid Safety Profile:\u003c\/strong\u003e Provides the \"brightening\" results of hydrofluoric acid cleaners but is much safer for the technician and the equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Targeted Aerosol Delivery:\u003c\/strong\u003e Ideal for spot-cleaning or for use on residential condensers where mixing liquid concentrates is impractical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Rapid Grease \u0026amp; Oil Breakdown:\u003c\/strong\u003e Specifically engineered to emulsify the greasy binders that trap dust and cottonwood in outdoor coils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 4291-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Nu-Calgon (Genuine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Aerosol Condenser Coil Cleaner (Alkaline)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan Size:\u003c\/strong\u003e 18 Ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse Required:\u003c\/strong\u003e Yes (Water Rinse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Air-Cooled Condensers ONLY (Not for Indoor Evaporators)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.4 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Bottom-Up\" Foam Method\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWhen using Nu-Brite® aerosol, always start spraying at the bottom of the coil and work your way up. This allows the foaming action to \"build\" on itself, ensuring the cleaner stays in contact with the fins longer rather than just running down the face. Wait 5–10 minutes for the foam to work, then rinse thoroughly with water until all bubbles disappear.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e4291-18\u003c\/strong\u003e is the aerosol version of the famous \"Blue\" liquid concentrate:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Refs:\u003c\/strong\u003e Nu-Brite, 429118, Alkaline Coil Wash, Blue Coil Cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential AC units, commercial rooftop condensers, and refrigeration systems.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nu-Brite","offers":[{"title":"Default Title","offer_id":52451513139563,"sku":"681001429115","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_d77ee62c-2bf8-4607-8431-fce5f630b0ec.png?v=1760124395"},{"product_id":"metal-zinc-p1662208736-r6-1-0-r6-insulated-supply-plenum-16-5-8-x-20-7-8-x-36","title":"Metal Zinc P1662208736-R6-1-0 R6 Insulated Supply Plenum 16-5\/8\" x 20-7\/8\" x 36\"","description":"\u003ch1\u003eMetal Zinc P1662208736-R6-1-0 R6 Insulated Supply Plenum 16-5\/8\" x 20-7\/8\" x 36\"\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eMetal Zinc P1662208736-R6-1-0\u003c\/strong\u003e is a high-quality, pre-fabricated \u003cstrong\u003eR6 Insulated Supply Plenum\u003c\/strong\u003e designed for residential and light commercial HVAC systems. Serving as the central distribution hub for conditioned air, this plenum attaches directly to the furnace or air handler outlet, allowing for the strategic connection of supply duct runs while maintaining critical system static pressure and thermal efficiency.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eConstructed from heavy-duty galvanized steel, this plenum features a \u003cstrong\u003e1-inch thick R6 fiberglass insulation lining\u003c\/strong\u003e. This internal insulation is vital for preventing external condensation (sweating) in unconditioned spaces like attics or crawlspaces, while also providing significant acoustic dampening to reduce mechanical blower noise. The \"No Flange\" design offers maximum installation flexibility, allowing the technician to custom-fit the connection to various equipment brands without being restricted by factory-set mounting lips.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Protection:\u003c\/strong\u003e R6-rated internal insulation prevents energy loss and eliminates condensation buildup on the exterior metal surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Dampening:\u003c\/strong\u003e The fiberglass liner absorbs high-frequency vibrations and air turbulence, leading to a quieter home environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Installation Flex:\u003c\/strong\u003e The \"No Flange\" and \"One End Cap\" configuration allows for easy field trimming and custom transitions to match specific equipment footprints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Integrity:\u003c\/strong\u003e Built from rigid, corrosion-resistant galvanized steel to handle high-velocity airflow without \"oil-canning\" or popping sounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e P1662208736-R6-1-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Metal Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e R6 Insulated Supply Plenum (One End Cap, No Flange)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16-5\/8\" (Width) x 20-7\/8\" (Depth) x 36\" (Height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Rating:\u003c\/strong\u003e R6 (1\" Internal Fiberglass Liner)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e One End Cap (Closed Top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 28.00 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Airtight Seal\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen mounting this plenum to your air handler, use high-quality foil tape or duct mastic on all seams, especially where the plenum meets the equipment. Even a small air leak at the plenum base can significantly drop your system's SEER2 efficiency and cause the unit to work harder. If you are cutting holes for take-offs, ensure you use a starting collar with a dampener to maintain balanced airflow across all rooms in the house.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe P1662208736-R6-1-0 is a universal distribution component compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment Fit:\u003c\/strong\u003e Fits most 3-ton to 4-ton furnaces and air handlers with a matching discharge opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct Types:\u003c\/strong\u003e Compatible with flex duct, round metal duct, and rectangular duct take-offs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e Meets or exceeds SMACNA residential duct construction standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eNote: Use 'CTRL+F' to search for your equipment cabinet size:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Size B:\u003c\/strong\u003e 17.5\" Wide Furnaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Size C:\u003c\/strong\u003e 21\" Wide Furnaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brands:\u003c\/strong\u003e Rheem, Ruud, Carrier, Bryant, Trane, American Standard, Lennox, Goodman, and Amana.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Metal Zinc","offers":[{"title":"Default Title","offer_id":52451514843499,"sku":"P1662208736-R6-1-0","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_27928a84-cc5a-44ad-8188-ef2c950b7239.png?v=1760124415"},{"product_id":"nu-calgon-4296-51-pan-spray-leak-sealer-black-color-16-ounce-aerosol","title":"Nu-Calgon 4296-51 Pan-Spray™ Leak Sealer - Black Color - 16 Ounce Aerosol","description":"\u003ch1\u003eNu-Calgon 4296-51 Pan-Spray™ Leak Sealer - Black Color - 16 Ounce Aerosol\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eNu-Calgon 4296-51 Pan-Spray™\u003c\/strong\u003e is a professional-grade \u003cstrong\u003erubberized leak sealer and patch\u003c\/strong\u003e specifically engineered for the HVACR and plumbing industries. This aerosol spray provides an immediate, waterproof solution for sealing leaks in condensate pans, cooling towers, and drainage systems, preventing costly water damage and extending the life of existing equipment.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eFormulated to withstand extreme environments, this sealer creates a durable, \u003cstrong\u003eflexible rubberized coating\u003c\/strong\u003e that will not chip, flake, or peel over time. It maintains its integrity across a wide temperature range of \u003cstrong\u003e-10°F to 250°F\u003c\/strong\u003e, ensuring the seal remains effective in both freezing evaporator conditions and high-heat mechanical rooms. The fast-acting formula dries to the touch in just \u003cstrong\u003e20 to 30 minutes\u003c\/strong\u003e, allowing technicians to complete repairs quickly during a single service call.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Waterproof Barrier:\u003c\/strong\u003e Provides a permanent, flexible seal that stops leaks in metal, plastic, and masonry surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion \u0026amp; Rust Protection:\u003c\/strong\u003e Coats metal surfaces to block out moisture and oxygen, preventing further oxidation and rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Build Flexibility:\u003c\/strong\u003e The rubberized formula expands and contracts with thermal changes, preventing cracks from reopening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Surface Adhesion:\u003c\/strong\u003e Superior bonding capabilities on galvanized steel, aluminum, PVC, and concrete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 4296-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Nu-Calgon (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 16 Ounce Aerosol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 20 sq. ft. per can (depending on thickness)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -10°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e 20-30 minutes (full cure in 24 hours)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.1 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Tip-Clear Technique\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTo ensure the spray nozzle doesn't clog for future use, always invert the can and spray for 2 seconds after your repair is finished until only clear gas comes out. For deep cracks in rusty condensate pans, wire-brush the area first and apply a light initial \"tack coat\" followed by a heavier second coat 5 minutes later for maximum thickness and durability.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 4296-51 is a direct professional alternative for the following applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e 4296-51, 429651\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standards:\u003c\/strong\u003e Used in place of traditional asphalt-based sealers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Products:\u003c\/strong\u003e 4296-50 (White Pan-Spray version).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC Equipment:\u003c\/strong\u003e Condensate Drain Pans, Evaporative Coolers, Swamp Coolers, Humidifier Reservoirs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoofing \u0026amp; Drainage:\u003c\/strong\u003e Gutters, Downspouts, Flashings, Roof Vents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial:\u003c\/strong\u003e Cooling Tower Basin Repair, Fluid Cooler Sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlumbing:\u003c\/strong\u003e Waste piping exteriors and concrete sumps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nu-Calgon","offers":[{"title":"Default Title","offer_id":52451514974571,"sku":"681001429658","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/4296-51.jpg?v=1774028234"},{"product_id":"southland-520-603-black-malleable-iron-tee-1-2-x-1-2-x-1-2-fpt","title":"Southland 520-603 – Black Malleable Iron Tee (1\/2\" x 1\/2\" x 1\/2\" FPT)","description":"\u003cp\u003e\u003cb\u003eMalleable Iron Fittings\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe offer one of the most extensive selections of black and galvanized malleable iron fittings in the industry. Available in 13 diameters from 1\/8\" to 6\", every fitting is produced to exact specifications. All galvanized products are zinc-coated for water applications and meet all low-lead requirements. In addition, all of our iron fittings undergo our rigorous testing and quality inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eProduct Highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStocked in most figures from 1\/8\" to 6\"\u003c\/li\u003e\n\u003cli\u003eAvailable in Black finish for oil and gas fluid applications\u003c\/li\u003e\n\u003cli\u003eAvailable in Galvanized finish for water, air and steam installations\u003c\/li\u003e\n\u003cli\u003eAvailable for servicing 150 psi and 300 psi applications\u003c\/li\u003e\n\u003cli\u003eHot dip galvanizing process according to ASTM A-153 standard\u003c\/li\u003e\n\u003cli\u003eGalvanized Products meet California Lead Plumbing Law\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded ends meeting with ANSI\/ASME B1.20.1 standard\u003c\/li\u003e\n\u003cli\u003eMaterial meeting with ASTM A-197 standard\u003c\/li\u003e\n\u003cli\u003eDimensions meet the following:\u003c\/li\u003e\n\u003cli\u003eThreaded Fittings with ASME B16.3 standard\u003c\/li\u003e\n\u003cli\u003eUnions with ASME B16.39 standard\u003c\/li\u003e\n\u003cli\u003eBushing Reducer and Plugs with ASME B16.14 standard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rheem","offers":[{"title":"Default Title","offer_id":52451515335019,"sku":"032888362239","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_a69d187e-f993-474d-ad8f-833b6413fd9d.png?v=1760124423"},{"product_id":"qwikproducts-qt2810-qwiklug-compressor-terminal-repair-kit-10-awg-2-ft","title":"QwikProducts QT2810 QwikLug Compressor Terminal Repair Kit 10 AWG - 2 ft.","description":"\u003ch1\u003eQwikProducts QT2810 QwikLug Compressor Terminal Repair Kit 10 AWG - 2 ft.\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eQwikProducts® QT2810 QwikLug\u003c\/strong\u003e is a specialized \u003cstrong\u003eCompressor Terminal Repair Kit\u003c\/strong\u003e designed to solve the common and costly problem of \"burnt-off\" compressor terminals. Instead of replacing an entire compressor due to a damaged spade terminal, this kit provides a permanent, heavy-duty electrical connection. It is an essential recovery tool for HVAC technicians working on high-draw residential and commercial air conditioning and refrigeration systems.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe QT2810 features \u003cstrong\u003e10 AWG color-coded wire leads\u003c\/strong\u003e extending \u003cstrong\u003e2 feet\u003c\/strong\u003e in length, capable of handling the high starting and running amperage of larger compressors. Unlike standard crimp-on connectors that can loosen and arc, the QwikLug uses a patented \u003cstrong\u003ebrass nut and socket design\u003c\/strong\u003e that tightens over the remains of the damaged terminal pin. This creates a high-pressure, gas-tight mechanical bond that resists vibration and thermal expansion, effectively restoring the electrical integrity of the compressor.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent Terminal Restoration:\u003c\/strong\u003e Saves functional compressors from being scrapped due to damaged or melted spade connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Fitment:\u003c\/strong\u003e Patented design fits both standard and small-diameter compressor terminal pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Amp Capacity:\u003c\/strong\u003e Heavy-duty 10-gauge wire supports high-load applications without overheating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Ease:\u003c\/strong\u003e Pre-stripped 2-foot leads follow standard HVAC coloring (Black\/Red\/White) for fast, error-free wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QT2810\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e QwikProducts® (Mainstream Engineering)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Compressor Terminal Repair Kit (QwikLug)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 10 AWG (Heavy Duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Length:\u003c\/strong\u003e 2 Feet (24 Inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 3 Lugs with Lead Wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Capacity:\u003c\/strong\u003e Rated for compressors up to 5-ton capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.65 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Sandpaper Prep\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBefore installing the QwikLug, use a small piece of fine sandpaper or a wire brush to clean the oxidized copper\/brass remains of the burnt terminal pin until it is shiny. A clean contact surface is critical; any carbon or soot left on the pin will create resistance, causing the new connection to overheat and eventually fail. Tighten the brass nuts firmly, but do not over-torque to avoid snapping the terminal pin.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe QT2810 is the preferred professional alternative to standard \"flag\" terminals and universal repair leads:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOld Part Numbers:\u003c\/strong\u003e QT-2810, 2810\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated Models:\u003c\/strong\u003e QT2812 (12 AWG version), QT2808 (8 AWG version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brands:\u003c\/strong\u003e Fits Bristol, Copeland, Tecumseh, Carlyle, and LG Compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Types:\u003c\/strong\u003e Hermetic and Scroll Compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential Split Systems, Package Units, Reach-in Coolers, Commercial Refrigeration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonnage:\u003c\/strong\u003e Typically used for 3-ton, 4-ton, and 5-ton AC\/HP units requiring 10 AWG service.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rheem","offers":[{"title":"Default Title","offer_id":52451515629931,"sku":"711582028107","price":59.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_c75b77ce-2855-4442-a842-6aad274317f2.png?v=1760124431"},{"product_id":"freon-r-407c-refrigerant-25-lb-cylinder","title":"Freon R-407C Refrigerant 25 lb. Cylinder","description":"\u003ch1\u003eFreon R-407C Refrigerant 25 lb. Cylinder\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eChemours Freon™ R-407C\u003c\/strong\u003e is a high-purity, non-ozone depleting HFC refrigerant blend designed as the primary service replacement for \u003cstrong\u003eR-22\u003c\/strong\u003e in positive displacement air conditioning and refrigeration systems. As a leading solution for legacy equipment maintenance, R-407C provides a reliable path to environmental compliance while ensuring your HVAC system continues to deliver optimal cooling performance without the high cost of a full system R-410A conversion.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eR-407C is engineered to closely match the operating pressures and cooling capacities of R-22, making it the preferred \"retrofit\" refrigerant for existing DX (Direct Expansion) systems. Being a \u003cstrong\u003eGenuine Chemours Freon™\u003c\/strong\u003e product ensures the highest level of ASHRAE A1 safety classification (non-flammable\/non-toxic) and minimal moisture content. Unlike lower-grade generic blends, Chemours R-407C maintains stable fractionation properties, which is critical for the thermal performance of evaporator and condenser coils in high-ambient conditions.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal R-22 Retrofit:\u003c\/strong\u003e Designed to replace R-22 in residential and commercial air conditioning with minimal system modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Chemours Quality:\u003c\/strong\u003e Manufactured to strict AHRI-700 purity standards to prevent non-condensables from damaging compressor valves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Compliance:\u003c\/strong\u003e Zero ODP (Ozone Depletion Potential) HFC blend, meeting current EPA requirements for equipment servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Stability:\u003c\/strong\u003e Provides similar discharge temperatures and pressures to R-22, protecting the compressor from overheating during peak loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e R-407C (Chemours D11710681 \/ Lennox Y8923)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Chemours (Formerly DuPont)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant Type:\u003c\/strong\u003e R-407C (HFC Blend)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Weight:\u003c\/strong\u003e 25 lbs (Net Weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Color:\u003c\/strong\u003e Brown (Standard R-407C Industry Color Code)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Rating:\u003c\/strong\u003e ASHRAE A1 (Non-Flammable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 31.0 lbs (Including Cylinder)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Liquid Phase Rule\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBecause R-407C is a zeotropic blend with \"temperature glide,\" it must always be removed from the cylinder in the \u003cstrong\u003eliquid phase\u003c\/strong\u003e (cylinder upside down or using a dip tube) to prevent fractionation. If charged as a vapor, the chemical balance of the refrigerant will change, leading to poor system performance. Additionally, ensure the system contains \u003cstrong\u003ePOE (Polyolester) oil\u003c\/strong\u003e, as R-407C will not return mineral oil to the compressor.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eR-407C is a direct replacement or equivalent for the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e D11710681, Y8923, 100455-23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Names:\u003c\/strong\u003e Forane 407C, Genetron 407C, Klea 407C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit For:\u003c\/strong\u003e R-22 (HCFC-22)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential AC:\u003c\/strong\u003e Split systems and Rooftop Units originally designed for R-22.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Chillers:\u003c\/strong\u003e Positive displacement chillers (Reciprocating, Scroll, and Screw).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration:\u003c\/strong\u003e Medium-temperature food displays and storage coolers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrands:\u003c\/strong\u003e Compatible with systems from Trane, Lennox, Carrier, Rheem, and York.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lennox","offers":[{"title":"Default Title","offer_id":52451515662699,"sku":"D11710681","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_a987bc99-ea00-48ae-8cb0-66dc3f06d268.jpg?v=1760124431"},{"product_id":"r-410a-refrigerant-25-lb-cylinder-genuine-oem-hfc-refrigerant","title":"R-410A Refrigerant 25 lb. Cylinder – Genuine OEM HFC Refrigerant","description":"\u003ch1\u003eR-410A Refrigerant 25 lb. Cylinder – Genuine OEM HFC Refrigerant\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eFreon™ R-410A\u003c\/strong\u003e is a high-purity, non-ozone depleting HFC refrigerant specifically engineered for high-pressure air conditioning and heat pump systems. As the industry standard for modern residential and light commercial HVAC equipment, R-410A provides superior cooling capacity and energy efficiency compared to legacy refrigerants. This 25 lb. cylinder ensures you have the necessary volume for complete system recharges or multiple service repairs. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Performance:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eR-410A is a near-azeotropic blend of HFC-32 and HFC-125 that operates at significantly higher pressures than R-22. Being a \u003cstrong\u003eGenuine Chemours Freon™\u003c\/strong\u003e product, it is manufactured to strict AHRI-700 purity standards to prevent non-condensables from causing compressor damage or system efficiency loss. Its high heat-transfer properties allow for the use of smaller, more efficient coils and compressors, which is a hallmark of modern 14+ SEER2 HVAC equipment. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Cooling:\u003c\/strong\u003e Delivers superior thermal heat transfer, allowing systems to reach higher SEER ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Chemours Quality:\u003c\/strong\u003e AHRI-700 certified to ensure zero moisture and maximum system longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern System Standard:\u003c\/strong\u003e The primary refrigerant for all post-2010 residential air conditioners and heat pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASHRAE A1 Safety Rating:\u003c\/strong\u003e Non-flammable and non-toxic, providing a safe operating environment for technicians and homeowners. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e R-410A (Chemours D11195655 \/ Lennox 100455-24)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Chemours (Formerly DuPont)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant Type:\u003c\/strong\u003e R-410A (HFC Blend)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Weight:\u003c\/strong\u003e 25 lbs (Net Weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Color:\u003c\/strong\u003e Rose \/ Pink (Standard R-410A Industry Color Code)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Rating:\u003c\/strong\u003e ASHRAE A1 (Non-Flammable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 31.0 lbs (Including Cylinder) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Liquid Charging Rule\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBecause R-410A is a blend, it must always be removed from the cylinder in the \u003cstrong\u003eliquid phase\u003c\/strong\u003e (cylinder upside down or using a dip tube) to prevent fractionation. Charging as a vapor will result in an incorrect chemical balance in the system. Furthermore, R-410A systems use \u003cstrong\u003ePOE (Polyolester) oil\u003c\/strong\u003e, which is highly hygroscopic; keep the system closed as much as possible during service to prevent moisture from contaminating the oil and creating acid. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eR-410A is a direct replacement or equivalent for the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e 100455-24, Y8924, D11195655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Names:\u003c\/strong\u003e Puron, Genetron AZ-20, Forane 410A, Suva 410A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e R-410A cannot be used in R-22 or R-407C systems due to pressure differences. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential AC:\u003c\/strong\u003e All modern 410A split systems and packaged units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Pumps:\u003c\/strong\u003e High-efficiency air-source and geothermal heat pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini-Splits:\u003c\/strong\u003e Ductless systems from Mitsubishi, Daikin, Fujitsu, and Gree.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrands:\u003c\/strong\u003e Compatible with Lennox, Carrier, Trane, Rheem, York, and Goodman\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Carrier","offers":[{"title":"Default Title","offer_id":52451515826539,"sku":"686114001494","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_ac25d191-b48b-468e-b502-4cf5d1c25de1.jpg?v=1760124432"},{"product_id":"rectorseal-97087-safe-t-switch-ss2-condensate-overflow-shut-off-switch","title":"RectorSeal 97087 Safe-T-Switch SS2 - Condensate Overflow Shut-Off Switch","description":"\u003ch1\u003eRectorSeal 97087 Safe-T-Switch SS2 - Condensate Overflow Shut-Off Switch\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eRectorSeal 97087 Safe-T-Switch SS2\u003c\/strong\u003e is a professional-grade condensate overflow shut-off switch designed for the auxiliary outlet of primary drain pans. As a vital safety component, it detects clogs in air conditioning condensate drain lines and automatically shuts down the HVAC system to prevent catastrophic water damage to ceilings, floors, and equipment.\u003c\/p\u003e\n\u003ch2\u003eTechnical Performance\u003c\/h2\u003e\n\u003cp\u003eDesigned for low-voltage applications, the SS2 operates on a \u003cstrong\u003e24 VAC\u003c\/strong\u003e circuit with a \u003cstrong\u003e1.25 Amp\u003c\/strong\u003e carrying capacity. It features a patented \u003cstrong\u003emagnetic reed switch\u003c\/strong\u003e that ensures reliable operation even if installed on a slope of up to 45 degrees. This \"Genuine OEM\" safety device is UL\/UR Listed and provides a precision fit that eliminates the erratic tripping often associated with non-certified aftermarket float switches.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: Adjustable Float Sensitivity\u003c\/strong\u003e – Allows technicians to fine-tune the float level using a ratcheting stem without needing to remove the cap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Magnetic Reed Reliability\u003c\/strong\u003e – High-performance switch logic prevents rapid cycling and ensures a clean break in the 24V circuit when water rises.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Easy Maintenance Design\u003c\/strong\u003e – The secure cap uses tapered cams for quick removal and reinstallation, providing instant access for cleaning the drain line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Compact Direct-Fit Installation\u003c\/strong\u003e – Specifically engineered for tight spaces, it includes a 3\/4\" adapter for a seamless \"plug-and-play\" connection to the primary pan's auxiliary port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 97087 (SS2 Gen 3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e RectorSeal (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Condensate Overflow Float Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 1.25 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead:\u003c\/strong\u003e 4-Foot or 6-Foot, 18 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Slope:\u003c\/strong\u003e Up to 45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Red vs. Yellow\" Wiring Choice\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor a total system shutdown (compressor and fan), wire the SS2 in series with the Red (R)\u003c\/strong\u003e thermostat wire. However, if you are in a high-humidity area and want the fan to keep running to prevent mold while the compressor is disabled, wire it into the \u003cstrong\u003eYellow (Y)\u003c\/strong\u003e cooling circuit instead.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e97087\u003c\/strong\u003e is the current Gen 3 standard and serves as a direct replacement or alternative for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Numbers:\u003c\/strong\u003e 97637 (Legacy SS2), 97632\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Variants:\u003c\/strong\u003e SS1 (Inline), SS3 (Emergency Pan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brands:\u003c\/strong\u003e Universal fit for 3\/4\" outlets on \u003cstrong\u003eTrane, Carrier, York, Goodman, Rheem\u003c\/strong\u003e, and \u003cstrong\u003eMr. Cool\u003c\/strong\u003e air handlers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Air Handlers:\u003c\/strong\u003e Compatible with all units featuring a 3\/4\" NPT auxiliary drain pan outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Series:\u003c\/strong\u003e First Co. HX Series, Janitrol units, and Mr. Cool MDU series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RectoSeal","offers":[{"title":"Default Title","offer_id":52451515924843,"sku":"021449976374","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_a16e7670-9a72-4bcc-96db-1e32e3c68d0e.jpg?v=1760124437"},{"product_id":"supco-jv1-jones-valve-condensate-drain-blow-out-valve-3-4-pvc","title":"Supco JV1 Jones Valve - Condensate Drain Blow Out Valve 3\/4\" PVC","description":"\u003ch1\u003eSupco JV1 Jones Valve - Condensate Drain Blow Out Valve 3\/4\" PVC\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eSupco JV1 Jones Valve\u003c\/strong\u003e is a technician-invented condensate drain line cleanout valve designed for high-efficiency HVAC and refrigeration systems. Part of the Supco TradeFox line, this valve provides a permanent, professional solution for clearing clogs without the need to cut and repair the PVC drain line during every service call.\u003c\/p\u003e\n\u003ch2\u003eTechnical Performance\u003c\/h2\u003e\n\u003cp\u003eConstructed from durable \u003cstrong\u003eSchedule 40 PVC\u003c\/strong\u003e, the JV1 features an integrated \u003cstrong\u003e1\/4\" male flare fitting with a Schrader valve\u003c\/strong\u003e for a secure connection to CO2 or nitrogen tanks. This design allows for high-pressure line clearing while maintaining a liquid-tight seal during normal operation. Its compact footprint ensures it meets \u003cstrong\u003eICC International Mechanical Code 307.2.5\u003c\/strong\u003e requirements for permanent cleanout access, even in tight attic or closet installations.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: Bi-Directional Clearing\u003c\/strong\u003e – The internal valve can be toggled to blast clogs toward the unit or out to the drain termination point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Permanent Installation\u003c\/strong\u003e – Eliminates the mess of water buckets and the repetitive labor of cutting into PVC lines for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Schrader Valve Safety\u003c\/strong\u003e – The built-in Schrader core prevents condensate leakage while allowing instant connection to compressed gas tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Code Compliance\u003c\/strong\u003e – Specifically designed to satisfy IMC and UMC requirements for a permanent condensate clean-out port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JV1 (Supco TradeFox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Sealed Unit Parts Co. (Supco)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Condensate Drain Blow Out Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection:\u003c\/strong\u003e 1\/4\" Male Flare with Schrader Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Size:\u003c\/strong\u003e 3\/4\" Nominal PVC (Slip x Slip)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Schedule 40 PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.5\" L x 3\" H x 3\" W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.7 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Primer Rule\"\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWhen installing the JV1, always apply PVC Primer before the glue to ensure a code-compliant, leak-proof bond. For the most effective clear-out, use a CO2 regulator set between 20–40 PSI to avoid dislodging distant pipe fittings or blowing out the secondary pan.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eJV1\u003c\/strong\u003e is a universal service tool and direct replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e Supco JV1, JV1B, TradeFox JV1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Variants:\u003c\/strong\u003e Often used in place of standard PVC tees or \"running traps\" for easier maintenance access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Gases:\u003c\/strong\u003e CO2 and Nitrogen tanks with 1\/4\" flare fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential Systems:\u003c\/strong\u003e Compatible with all 3\/4\" PVC drain lines for \u003cstrong\u003eCarrier, Trane, Lennox, Goodman, Rheem, and York\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration:\u003c\/strong\u003e Ideal for commercial reach-ins, walk-in coolers, and display cases utilizing standard 3\/4\" condensate plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Supco","offers":[{"title":"Default Title","offer_id":52451517301099,"sku":"687152230877","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_3558100a-a71d-49a4-9878-dd29942ff22c.png?v=1760124453"},{"product_id":"m-m-p8163-42136r6f0-r6-insulated-plenum-16-3-4-x-21-x-36-28-gauge","title":"M\u0026M P8163\/42136R6F0 - R6 Insulated Plenum 16 3\/4\" x 21\" x 36\" 28-Gauge","description":"\u003ch1\u003eM\u0026amp;M P8163\/42136R6F0 - R6 Insulated Plenum 16 3\/4\" x 21\" x 36\" 28-Gauge\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eM\u0026amp;M P8163\/42136R6F0\u003c\/strong\u003e is a premium, factory-insulated supply plenum designed for residential and light commercial HVAC systems. This critical distribution component attaches to the furnace or air handler outlet, acting as the pressurized \"distribution hub\" that directs conditioned air into the ductwork system while providing superior thermal resistance.\u003c\/p\u003e\n\u003ch2\u003eTechnical Performance\u003c\/h2\u003e\n\u003cp\u003eConstructed from high-grade \u003cstrong\u003e28-gauge galvanized steel\u003c\/strong\u003e, this plenum features pre-installed \u003cstrong\u003eR6 fiberglass insulation\u003c\/strong\u003e to minimize thermal loss and prevent exterior condensation in unconditioned spaces like attics or crawlspaces. The \"No Flange\" (F0) design offers maximum installation flexibility, allowing technicians to custom-fit the plenum to various equipment footprints without pre-set structural interference.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: R6 Thermal Efficiency\u003c\/strong\u003e – High-density internal insulation reduces energy loss and ensures quiet air distribution by dampening blower harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Heavy-Duty 28-Gauge Steel\u003c\/strong\u003e – Rigid galvanized construction prevents \"oil-canning\" or popping sounds during high-static system startups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Flange-Free (F0) Design\u003c\/strong\u003e – Provides a flat-edge finish for a custom, air-tight seal against a wide range of furnace and air handler cabinet sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Boxed \u0026amp; Labeled\u003c\/strong\u003e – Factory-protected packaging ensures the plenum arrives without dings, dents, or crushed insulation, ready for immediate job-site install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e P8163\/42136R6F0 (MFG: P816342136R6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e M\u0026amp;M Manufacturing (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Insulated Supply Plenum Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16 3\/4\" Width x 21\" Depth x 36\" Height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e R6 Internal Fiberglass Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 28-Gauge Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Type:\u003c\/strong\u003e F0 (No Flange \/ Raw Edge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e ~24 lbs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"S-Cleat\" Secret\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eSince this is a \"No Flange\" model, use \u003cstrong\u003eS-cleats and Drive-cleats\u003c\/strong\u003e or high-quality foil tape and mastic to create your seal. For a truly professional finish in high-humidity areas, apply a bead of silicone between the plenum and the unit before mechanically fastening to ensure zero air bypass.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eP8163\/42136R6F0\u003c\/strong\u003e is a universal distribution component compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment Brands:\u003c\/strong\u003e Trane, American Standard, Carrier, Bryant, Goodman, and Rheem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Matching:\u003c\/strong\u003e Fits most 3-ton to 4-ton furnace cabinets with 17.5\" or 21\" widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Ref:\u003c\/strong\u003e M\u0026amp;M R6 Series Plenums, 16x21x36 Insulated Box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17.5\" Cabinets:\u003c\/strong\u003e Fits \"B\" size furnace cabinets (with minor field adjustment).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21\" Cabinets:\u003c\/strong\u003e Direct fit for \"C\" size furnace cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries Support:\u003c\/strong\u003e Compatible with XV80, XC80, 58TN, 59MN, and GM9 series units.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M\u0026M","offers":[{"title":"Default Title","offer_id":52451517399403,"sku":"845927052349","price":195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_082fbde8-7c27-4ed6-8145-39c323585ac4.png?v=1760124457"},{"product_id":"tradepro-tp-5-hard-start-kit-1-3-hp-to-2-hp-hvac-compressor-booster","title":"TRADEPRO TP-5 Hard Start Kit - 1\/3 HP to 2 HP HVAC Compressor Booster","description":"\u003ch1\u003eTRADEPRO TP-5 Hard Start Kit - 1\/3 HP to 2 HP HVAC Compressor Booster\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eTRADEPRO TP-5\u003c\/strong\u003e is a high-performance hard start kit engineered to provide an essential electrical torque boost to residential and light commercial HVAC compressors. By significantly increasing the starting torque, this component helps the compressor overcome high head pressure and internal mechanical friction, ensuring a rapid and reliable start every time the thermostat calls for cooling.\u003c\/p\u003e\n\u003ch2\u003eTechnical Performance\u003c\/h2\u003e\n\u003cp\u003eDesigned for systems ranging from \u003cstrong\u003e1\/3 HP to 2 HP\u003c\/strong\u003e, the TP-5 utilizes a specialized \u003cstrong\u003e\"Two-Wire\"\u003c\/strong\u003e configuration that allows for a non-polarized, direct connection to the existing run capacitor. As a \u003cstrong\u003eGenuine TRADEPRO\u003c\/strong\u003e performance upgrade, it features a high-capacity start capacitor paired with a solid-state relay. This relay precisely senses the motor's speed and automatically disconnects the start circuit once the compressor is running, protecting the sensitive internal windings from electrical stress and overheating.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: 300% Start Torque Increase\u003c\/strong\u003e – Reduces the duration of high-amperage \"locked rotor\" starts, significantly extending the life of the compressor motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Universal Two-Wire Installation\u003c\/strong\u003e – Simplifies service calls with a fast, two-lead connection; no additional wiring or mounting brackets are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Solid-State Cutout Technology\u003c\/strong\u003e – Integrated sensing ensures the capacitor is only active for the exact millisecond needed to initiate rotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Low-Voltage System Support\u003c\/strong\u003e – Ideal for units operating on long wire runs or in areas prone to summer voltage drops (brown-outs).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e TP-5 (MFG: TP-5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TRADEPRO (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hard Start Kit (Start Capacitor + Solid-State Relay)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Range:\u003c\/strong\u003e 1\/3 HP to 2 HP Compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 115V - 288V AC (Multi-Voltage Compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-Wire (Non-Polarized)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Small System\" Specialist\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWhile the TP-6 is for larger units, the TP-5 is perfectly tuned for 1-ton and 1.5-ton systems, as well as many large reach-in coolers. Using a \"too powerful\" hard start on a small compressor can actually stress the bearings, so the TP-5 is the professional choice for smaller residential split systems and heat pumps.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTP-5\u003c\/strong\u003e is a universal service component and a direct alternative for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e TP5, TP-HS5, HS5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Alternatives:\u003c\/strong\u003e Supco HS5, SPP5, DiversiTech HS5, Mars 32701\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Compatible with Reciprocating and Scroll compressors found in 12,000 to 24,000 BTU systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0 Ton Units:\u003c\/strong\u003e Fits all major brands including \u003cstrong\u003eTrane, Carrier, and Goodman\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 Ton Units:\u003c\/strong\u003e Ideal for residential condensers and heat pump sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 Ton Units:\u003c\/strong\u003e Max capacity for the TP-5 (Use TP-6 for 2.5 to 3 Ton systems).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration:\u003c\/strong\u003e Fits most commercial 1\/3 HP to 1 HP reach-in compressor types.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TRADEPRO®","offers":[{"title":"Default Title","offer_id":52451519627627,"sku":"687152226795","price":40.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/TP-5.jpg?v=1774117335"},{"product_id":"southland-583-030-black-iron-nipple-1-2-x-3-schedule-40-pipe","title":"Southland 583-030 Black Iron Nipple - 1\/2\" x 3\" Schedule 40 Pipe","description":"\u003ch1\u003eSouthland 583-030 Black Iron Nipple - 1\/2\" x 3\" Schedule 40 Pipe\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eSouthland 583-030\u003c\/strong\u003e is a professional-grade black iron pipe nipple designed for low-pressure plumbing and gas distribution systems. As a critical structural and fluid-carrying component, this nipple provides a secure, threaded connection between fittings, valves, or manifold ports in residential and commercial HVAC and boiler applications.\u003c\/p\u003e\n\u003ch2\u003eTechnical Performance\u003c\/h2\u003e\n\u003cp\u003eManufactured from high-strength \u003cstrong\u003eSchedule 40 steel\u003c\/strong\u003e, this \u003cstrong\u003e1\/2\" x 3\"\u003c\/strong\u003e nipple is hydrostatically tested and meets all applicable \u003cstrong\u003eASTM A733\u003c\/strong\u003e and \u003cstrong\u003eANSI\/ASME B1.20.1\u003c\/strong\u003e standards for thread precision. The \"Black Iron\" finish is achieved through a protective oil coating that resists oxidation during storage and transport. Being a \u003cstrong\u003eGenuine Southland\u003c\/strong\u003e fitting, it features clean-cut, tapered National Pipe Threads (NPT) that ensure a leak-proof seal when used with high-quality pipe sealant or PTFE tape. \u003c\/p\u003e\n\u003ch2\u003eKey Features and Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 1: Precision Tapered Threads\u003c\/strong\u003e – NPT threads on both ends provide a tight, wedge-like seal for gas and liquid applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 2: Schedule 40 Durability\u003c\/strong\u003e – Robust wall thickness handles the rigors of high-torque installation without deforming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 3: Natural Gas \u0026amp; Propane Rated\u003c\/strong\u003e – Specifically engineered for safe use in fuel gas piping systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature 4: Hydrostatically Tested\u003c\/strong\u003e – Every nipple is factory-tested to ensure material integrity and zero porosity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details and Key Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 583-030 (MFG: 583-030)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Southland \/ Mueller (Genuine OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Black Iron Pipe Nipple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size (ID):\u003c\/strong\u003e 1\/2 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Schedule 40 Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e MPT x MPT (Male Pipe Thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black (Oil-Coated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.25 lbs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Two-Wrench\" Technique\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWhen installing black iron nipples into a gas valve or manifold, always use two pipe wrenches: one to hold the base fitting (backup) and one to tighten the nipple. This prevents the \"hidden\" internal components of the gas valve from twisting and failing, which is the leading cause of post-install gas leaks! \u003c\/p\u003e\n\u003ch2\u003eCross-Reference \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e583-030\u003c\/strong\u003e is a standard trade-size fitting and serves as a direct replacement or equivalent for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Numbers:\u003c\/strong\u003e 1\/2x3BIN, 583030, Mueller 583-030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Gas supply lines, hydronic heating loops, and air compressor drops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with all 1\/2\" FPT black iron, malleable, or brass fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtensive Model Compatibility List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas Furnaces:\u003c\/strong\u003e Compatible with 1\/2\" gas train inlets for \u003cstrong\u003eTrane, Carrier, York, and Goodman\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Heaters:\u003c\/strong\u003e Standard size for many residential gas control valve inlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoilers:\u003c\/strong\u003e Used in low-pressure steam and hot water header assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Southland","offers":[{"title":"Default Title","offer_id":52451519693163,"sku":"032888005372","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_b2f0698b-7c40-42a0-a13e-e69925be23f0.png?v=1760124486"},{"product_id":"tradepro-tp-pvc-401007a-3-4-slip-x-slip-x-slip-tee-schedule-40-pvc","title":"TRADEPRO TP-PVC-401007A – 3\/4\" Slip x Slip x Slip Tee Schedule 40 PVC","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eTRADEPRO TP-PVC-401007A – 3\/4\" Slip x Slip x Slip Tee Schedule 40 PVC\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eTRADEPRO® TP-PVC-401007A\u003c\/strong\u003e is a high-quality Schedule 40 PVC Tee designed for reliable fluid handling and condensate management in residential and commercial HVAC systems. This 3\/4-inch fitting features triple \"slip\" connections, allowing for a secure, solvent-weld bond between three sections of PVC piping. It is the industry standard for creating branch lines in primary and secondary drain systems.\u003c\/p\u003e\n\u003cp\u003eManufactured to meet rigorous ASTM standards, this Schedule 40 tee offers superior chemical and corrosion resistance, ensuring it won't degrade when exposed to acidic furnace condensate or outdoor elements. Whether you are piping a high-efficiency condensing furnace or a traditional AC evaporator coil, the \u003cstrong\u003eGenuine TRADEPRO®\u003c\/strong\u003e fitment ensures leak-free performance and a professional finish for every installation.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Slip Connections:\u003c\/strong\u003e Engineered for a tight, consistent fit with 3\/4\" PVC pipe to ensure maximum solvent-weld surface area.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSchedule 40 Durability:\u003c\/strong\u003e Thick-walled construction handles standard HVAC drainage pressures and resists cracking during temperature fluctuations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Design:\u003c\/strong\u003e Smooth interior walls reduce friction and prevent the buildup of algae or \"slime\" common in condensate lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCorrosion Resistant:\u003c\/strong\u003e 100% PVC material is immune to the corrosive effects of high-efficiency gas furnace condensate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e TP-PVC-401007A (MFR # L89845 \/ L89845W)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TRADEPRO®\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e 3\/4\" PVC Slip Tee (S x S x S)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC Schedule 40\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4 Inch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Slip (Socket)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMax Temperature:\u003c\/strong\u003e 140°F (60°C)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.15 lbs (Sold individually; 10 per bag)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Quarter-\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTurn Rule\u003c\/strong\u003e When solvent-welding this tee, apply a thin layer of primer followed by PVC cement to both the pipe and the fitting. Insert the pipe fully into the slip socket and give it a quick \u003cstrong\u003equarter-turn\u003c\/strong\u003e to evenly distribute the glue. Hold it firmly for 10–15 seconds to prevent \"push-out\" while the chemical bond sets.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTP-PVC-401007A\u003c\/strong\u003e is compatible with all standard 3\/4\" Schedule 40 PVC piping and replaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLegacy Numbers:\u003c\/strong\u003e L89845, 401-007, 052063147823\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e Fits any 3\/4\" nominal PVC pipe used in Carrier, Trane, Lennox, and Goodman installations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCondensate Drainage:\u003c\/strong\u003e Fits all standard 3\/4\" MPT or FPT drain pan outlets (when used with a male\/female adapter).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVent Piping:\u003c\/strong\u003e Suitable for non-combustion air intake and general drainage applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TRADEPRO®","offers":[{"title":"Default Title","offer_id":52451520905579,"sku":"039923352040","price":0.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_9a72687a-7d83-4630-beb0-1b4ef7c893a9.png?v=1760124500"},{"product_id":"tradepro-tp-pvc-406007a-3-4-slip-x-slip-90-elbow-schedule-40-pvc","title":"TRADEPRO TP-PVC-406007A – 3\/4\" Slip x Slip 90° Elbow Schedule 40 PVC","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eTRADEPRO TP-PVC-406007A – 3\/4\" Slip x Slip 90° Elbow Schedule 40 PVC\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eTRADEPRO® TP-PVC-406007A\u003c\/strong\u003e is a professional-grade 90-degree elbow designed for high-performance fluid handling and condensate management. Featuring dual 3\/4-inch \"slip\" sockets, this fitting allows for tight-radius turns in PVC piping systems, making it the go-to solution for routing drain lines around furnace cabinets, evaporator coils, and structural obstacles.\u003c\/p\u003e\n\u003cp\u003eBuilt to heavy-duty Schedule 40 specifications, this elbow offers exceptional impact resistance and durability. Unlike thin-walled alternatives, the \u003cstrong\u003eGenuine TRADEPRO®\u003c\/strong\u003e TP-PVC-406007A is engineered to handle the thermal expansion and contraction cycles of modern HVAC systems. Its smooth internal bore minimizes flow resistance, ensuring that sludge and condensate move freely to the drain or pump without causing backups.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision 90° Geometry:\u003c\/strong\u003e Provides a perfect right-angle turn for clean, professional-looking pipe runs in tight mechanical closets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDual Slip Connections:\u003c\/strong\u003e Designed for a secure, high-strength solvent-weld bond with standard 3\/4\" Schedule 40 PVC pipe.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eChemical \u0026amp; Acid Resistance:\u003c\/strong\u003e Specifically formulated to resist the corrosive effects of furnace condensate and common HVAC cleaning agents.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eASTM D2466 Certified:\u003c\/strong\u003e Meets industry standards for Schedule 40 pressure fittings, ensuring consistent wall thickness and reliability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e TP-PVC-406007A (MFR # L85565 \/ L85565W)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TRADEPRO®\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e 3\/4\" PVC 90° Elbow (S x S)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC Schedule 40\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4 Inch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Slip (Socket) x Slip (Socket)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMax Temperature:\u003c\/strong\u003e 140°F (60°C)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.12 lbs (Sold individually; 10 per bag)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The \"Dry Fit\" Check\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAlways \"dry-fit\" your 90° elbows before applying glue, especially in tight spaces. Use a permanent marker to draw a small alignment line across the fitting and the pipe; this ensures that once you apply the fast-setting PVC cement, you can quickly twist the elbow to the exact angle needed without guessing.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTP-PVC-406007A\u003c\/strong\u003e is a direct replacement for standard 3\/4\" PVC fittings including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLegacy Numbers:\u003c\/strong\u003e L85565, L85565W, 406-007, 052063148141\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e Fits all 3\/4\" nominal PVC pipe used by Trane, Carrier, Lennox, and Goodman technicians.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHVAC Condensate:\u003c\/strong\u003e Primary and secondary drain lines for AC coils and condensing furnaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePotable Water:\u003c\/strong\u003e Suitable for cold-water pressure applications (check local codes).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIrrigation:\u003c\/strong\u003e Frequently used in residential and commercial sprinkler systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TRADEPRO®","offers":[{"title":"Default Title","offer_id":52451521429867,"sku":"039923352064","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_786e334b-c1bb-4c45-9c87-cb141211f56b.png?v=1760124501"},{"product_id":"tradepro®-tp-pvc-435007a-3-4-slip-x-fipt-female-adapter-schedule-40-pvc","title":"TRADEPRO® TP-PVC-435007A 3\/4\" Slip x FIPT Female Adapter Schedule 40 PVC","description":"\u003ch1 data-pm-slice=\"1 1 []\"\u003eTRADEPRO® TP-PVC-435007A 3\/4\" Slip x FIPT Female Adapter Schedule 40 PVC\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eThe TRADEPRO® TP-PVC-435007A is a precision-engineered, genuine OEM-grade Schedule 40 PVC fitting designed to serve as the critical transition point between rigid piping and threaded components. Acting as the \"connector link\" in your HVAC condensate drainage or residential pressure system, this female adapter allows for a secure, leak-proof bridge from 3\/4\" non-threaded pipe to 3\/4\" male threaded valves, drain pans, or cleanouts. Specifically manufactured for high-durability applications, it supports a wide range of furnace and air handler drainage series, ensuring proper moisture removal and preventing system backups.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e• Optimized Drainage Flow: Precision-molded internal bore ensures smooth condensate transit, reducing the risk of biofilm buildup and airflow blockages in the drain line.\u003c\/p\u003e\n\u003cp\u003e• Genuine OEM Fitment: Engineered to exact Schedule 40 tolerances, part number TP-PVC-435007A provides a \"interference fit\" with 3\/4\" pipe for maximum solvent weld strength.\u003c\/p\u003e\n\u003cp\u003e• Noise \u0026amp; Vibration Dampening: The heavy-walled PVC construction absorbs minor system vibrations, preventing the \"rattling\" common in thin-walled or loose-fitting aftermarket drainage adapters.\u003c\/p\u003e\n\u003cp\u003e• High-Torque FIPT Threads: Features reinforced Female Iron Pipe Threads (FIPT) designed to withstand the torque required for a watertight seal without cracking the fitting body.\u003c\/p\u003e\n\u003cp\u003e• Professional Grade Finish: Clean white aesthetic provides a high-quality look for residential installs while offering superior resistance to the acidic condensate produced by high-efficiency furnaces.\u003c\/p\u003e\n\u003ch2\u003eProduct Details:\u003c\/h2\u003e\n\u003cp\u003e• Part Number: TP-PVC-435007A (MFG: L02410W)\u003c\/p\u003e\n\u003cp\u003e• Manufacturer: TRADEPRO®\u003c\/p\u003e\n\u003cp\u003e• Part Type: PVC Schedule 40 Female Adapter\u003c\/p\u003e\n\u003cp\u003e• Bore Size: 3\/4\" Slip x 3\/4\" FIPT\u003c\/p\u003e\n\u003cp\u003e• Rotation\/Orientation: Straight Transition\u003c\/p\u003e\n\u003cp\u003e• Material: Rigid Polyvinyl Chloride (PVC)\u003c\/p\u003e\n\u003cp\u003e• Schedule: 40\u003c\/p\u003e\n\u003cp\u003e• Shipping Weight: 0.05 lbs (Per Unit)\u003c\/p\u003e\n\u003ch2\u003e🛠️ HVAC Depot Pro Tip: The \"Quarter-Turn\" Rule\u003c\/h2\u003e\n\u003cp\u003eWhen threading this TP-PVC-435007A onto plastic male threads (like those on an evaporator coil drain pan), always tighten by hand first. Once snug, use a wrench for only an additional 1\/4 turn. Over-tightening PVC-to-PVC threads is the leading cause of stress-cracking. Always use a non-hardening thread sealant or PTFE tape specifically rated for plastics to ensure a permanent, leak-free seal.\u003c\/p\u003e\n\u003ch2\u003eCross-Reference:\u003c\/h2\u003e\n\u003cp\u003e• OEM Numbers: 435-007, 435007, 049081131102\u003c\/p\u003e\n\u003cp\u003e• Legacy\/Drawing Numbers: L02410W, PVC 00435 0700\u003c\/p\u003e\n\u003cp\u003e• Aftermarket Cross-refs: Spears 435-007, Charlotte Pipe PVC 2101, LASCO 435-007\u003c\/p\u003e\n\u003cp\u003eModel Compatibility:\u003c\/p\u003e\n\u003cp\u003e• Condensing Furnaces: 58MVP, 58MVC, 58UVB, 926T, 925S, 987M, 59MN7, 59TP6\u003c\/p\u003e\n\u003cp\u003e• Evaporator Coils: CAPF, CHPF, CAUF, CAPT, CNPVP, CNRVP\u003c\/p\u003e\n\u003cp\u003e• Air Handlers: ARUF, AVPTC, MBVC, MBR, ASPT, AWUF\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TRADEPRO®","offers":[{"title":"Default Title","offer_id":52451521593707,"sku":"840824021235","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_1c0719a5-6115-471d-9813-da167cbb026f.png?v=1760124505"},{"product_id":"tradepro-tp-pvc-436007a-3-4-mipt-x-slip-male-adapter-schedule-40-pvc","title":"TRADEPRO TP-PVC-436007A – 3\/4\" MIPT x Slip Male Adapter Schedule 40 PVC","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eTRADEPRO TP-PVC-436007A – 3\/4\" MIPT x Slip Male Adapter Schedule 40 PVC\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eTRADEPRO® TP-PVC-436007A\u003c\/strong\u003e is a high-strength male adapter designed to bridge the gap between threaded components and standard PVC piping. Featuring a 3\/4\" Male Iron Pipe Thread (MIPT) on one end and a 3\/4\" Slip socket on the other, this fitting is the primary connection point for linking evaporator coil drain pans, condensate pumps, and threaded valves to a permanent PVC drainage system.\u003c\/p\u003e\n\u003cp\u003eBuilt to rigorous Schedule 40 standards, this \u003cstrong\u003eGenuine TRADEPRO®\u003c\/strong\u003e adapter features precision-cut threads that ensure a leak-free seal without the risk of cross-threading common in lower-grade plastics. Whether you are performing a fresh furnace installation or a quick AC repair, the TP-PVC-436007A provides the mechanical strength needed to withstand the vibration and pressure of modern high-efficiency HVAC equipment.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision MIPT Threads:\u003c\/strong\u003e Engineered for a perfect match with standard 3\/4\" FPT ports on drain pans and plumbing fixtures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSolvent-Weld Slip Socket:\u003c\/strong\u003e Deep socket design ensures maximum surface contact for a permanent, leak-proof bond with 3\/4\" PVC pipe.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Hex Nut Shape:\u003c\/strong\u003e Features a molded hexagonal grip area for easy tightening with a wrench or pliers without marring the fitting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCorrosion-Proof Schedule 40:\u003c\/strong\u003e Immune to the acidic condensate produced by high-efficiency condensing furnaces and cooling coils.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e TP-PVC-436007A (MFR # L03010 \/ L03010W)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TRADEPRO®\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e 3\/4\" PVC Male Adapter (MIPT x Slip)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC Schedule 40\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4 Inch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Male Threaded (MIPT) x Slip (Socket)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMax Temperature:\u003c\/strong\u003e 140°F (60°C)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.10 lbs (Sold individually; 10 per bag)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The Two-Turn Rule\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen threading this adapter into a plastic drain pan, always use a high-quality thread sealant or Teflon tape. Tighten the fitting by hand until snug, then use a wrench to go only \u003cstrong\u003eone to two full turns\u003c\/strong\u003e further. Over-tightening plastic-to-plastic threads can cause the drain pan port to crack, leading to a costly secondary leak.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e The \u003cstrong\u003eTP-PVC-436007A\u003c\/strong\u003e is a universal fit for 3\/4\" threaded HVAC and plumbing applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLegacy Numbers:\u003c\/strong\u003e L03010, L03010W, 436-007, 052063150045\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndustry Standard:\u003c\/strong\u003e Connects to drain pans from Trane, Carrier, Goodman, Rheem, and more.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDrain Pan Outlets:\u003c\/strong\u003e Primary and secondary 3\/4\" FPT outlets on A-coils and slab coils.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCondensate Pumps:\u003c\/strong\u003e Threaded discharge ports on Little Giant, Hartell, and DiversiTech pumps.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Plumbing:\u003c\/strong\u003e Cold water lines and irrigation manifolds using 3\/4\" threads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TRADEPRO®","offers":[{"title":"Default Title","offer_id":52451521659243,"sku":"039923352170","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_23389c7e-106d-4ef0-980a-f359c5a368fb.png?v=1760124506"},{"product_id":"trane-val10395-genuine-oem-replacement-3-5-ton-thermostatic-expansion-valve-txv","title":"Trane VAL10395 – Genuine OEM Replacement 3-5 Ton Thermostatic Expansion Valve (TXV)","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eTrane VAL10395 – Genuine OEM Replacement 3-5 Ton Thermostatic Expansion Valve (TXV)\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eTrane VAL10395\u003c\/strong\u003e is a high-precision, genuine OEM thermostatic expansion valve designed to optimize refrigerant flow in R410A systems. This critical component acts as the \"metering device\" for your HVAC system, constantly adjusting the amount of liquid refrigerant entering the evaporator coil based on the cooling load. By maintaining the perfect balance of superheat, it protects your compressor from liquid slugging while ensuring maximum cooling efficiency and humidity removal.\u003c\/p\u003e\n\u003cp\u003eBuilt for technical reliability, this \u003cstrong\u003e3 Ton Nominal (5 Ton Rated)\u003c\/strong\u003e valve features a \u003cstrong\u003enon-bleed port\u003c\/strong\u003e design, which prevents refrigerant from migrating when the system is off—ideal for maintaining high SEER ratings. It is equipped with an integrated \u003cstrong\u003echeck valve\u003c\/strong\u003e for heat pump applications and a 30-inch external equalizer line to accurately sense pressure at the coil outlet. Choosing this Genuine OEM valve ensures the mechanical fittings align perfectly with Trane and American Standard factory copper lines, eliminating the need for complex brazing adapters.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Refrigerant Metering:\u003c\/strong\u003e Automatically adjusts R410A flow to maintain optimal evaporator superheat.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Bleed Port Design:\u003c\/strong\u003e Enhances system efficiency by preventing pressure equalization during the \"off\" cycle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHeat Pump Ready:\u003c\/strong\u003e Features an internal check valve, making it suitable for both Straight Cool and Heat Pump systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Fittings:\u003c\/strong\u003e Designed for a secure, leak-free connection using standard mechanical installation tools.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e VAL10395 (Replaces VAL08075, VAL09045)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Trane \/ American Standard (Genuine OEM)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e Thermostatic Expansion Valve (TXV)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRefrigerant Type:\u003c\/strong\u003e R410A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 Ton Nominal (Up to 5 Ton Rated)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEqualizer:\u003c\/strong\u003e 0.093\" OD x 30.00\" Long External Equalizer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Internal Check Valve, Non-Bleed Port\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.8 lbs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ \u003cstrong\u003eHVAC Depot Pro Tip: The \"Bulb Position\" Rule\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWhen installing the VAL10395, the sensing bulb must be mounted on a horizontal run of the suction line at the \"3 or 9 o'clock\" position. Ensure the bulb is tightly strapped to clean, bare copper and fully insulated with foam tape. If the bulb senses ambient air temperature instead of the refrigerant line temperature, the valve will \"flood\" the evaporator and potentially damage your compressor.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe VAL10395 is a direct OEM replacement for the following part numbers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Numbers:\u003c\/strong\u003e VAL08075, VAL09045, VAL09556, X13650734010\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Compatibility:\u003c\/strong\u003e Fits various 3 to 5 Ton Trane and American Standard Evaporator Coils (4PXA, 4PXC, 4TXA, 4TXC series).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trane","offers":[{"title":"Default Title","offer_id":52451525230955,"sku":"VAL10395","price":195.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_e10f1231-ca47-4c30-a917-57ad40c783bb.jpg?v=1760124557"},{"product_id":"advanced-distributor-products-165616602a-txv-kit-non-bleed-hp-a-c-r410a-3-5-5-ton","title":"Advanced Distributor Products 165616602A – TXV Kit, Non-Bleed HP-A\/C (R410A, 3.5–5 Ton)","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eAdvanced Distributor Products 165616602A – TXV Kit, Non-Bleed HP-A\/C (R410A, 3.5–5 Ton)\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eADP 165616602A\u003c\/strong\u003e is a high-precision, genuine OEM Thermostatic Expansion Valve (TXV) kit specifically engineered for Advanced Distributor Products (ADP) evaporator coils. As the primary metering device for your air conditioner or heat pump, this valve modulates the flow of \u003cstrong\u003eR410A refrigerant\u003c\/strong\u003e based on the cooling load. By maintaining the perfect balance of superheat, it ensures your system operates at peak energy efficiency while protecting the compressor from liquid slugging.\u003c\/p\u003e\n\u003cp\u003eTechnically designed for versatility, this kit is rated for \u003cstrong\u003e42,000 to 60,000 BTU (3.5–5 Tons)\u003c\/strong\u003e applications. It features a \u003cstrong\u003enon-bleed port\u003c\/strong\u003e design, which maintains system pressure during the \"off\" cycle to improve SEER ratings and provide faster cooling upon startup. As a \u003cstrong\u003eHeat Pump (HP) compatible\u003c\/strong\u003e valve, it includes an internal check valve that allows refrigerant to flow in reverse during the heating cycle, making it a universal solution for both straight-cool and heat pump split systems.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Metering (42-60k BTU):\u003c\/strong\u003e Optimized for large-tonnage 3.5, 4, and 5-ton evaporator coils.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Bleed Efficiency:\u003c\/strong\u003e Improves seasonal energy efficiency by preventing refrigerant migration when the compressor is idle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHeat Pump \u0026amp; A\/C Compatible:\u003c\/strong\u003e Integrated internal check valve allows for seamless operation in both heating and cooling modes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Bolt-On Kit:\u003c\/strong\u003e Designed for mechanical installation, typically requiring no brazing for the valve body itself.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 165616602A (Replaces 65616602)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Advanced Distributor Products (ADP)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e TXV Replacement Kit (External Equalizer)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R410A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3.5 to 5.0 Ton (Nominal)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Mechanical Chatleff \/ Threaded\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.5 lbs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The \"Chatleff\" Connection\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen installing the 165616602A, ensure the Teflon O-ring is seated perfectly within the Chatleff fitting before tightening. Over-torquing can crush the seal and cause a slow refrigerant leak, while under-torquing won't engage the seal. Also, always use a backup wrench on the valve body to prevent twisting or kinking the delicate copper equalizer line during installation.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 165616602A is a direct replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eADP Numbers:\u003c\/strong\u003e 165616602, 65616602, 916602\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoil Compatibility:\u003c\/strong\u003e Fits ADP \"C\" and \"F\" series evaporator coils used with Lennox, Rheem, Goodman, and other major brands.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ADP","offers":[{"title":"Default Title","offer_id":52451526410603,"sku":"165616602A","price":234.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_073c6f37-1e15-44c9-9b84-8d93cf5ff965.jpg?v=1760124581"},{"product_id":"diversitech-l3642-3-concrete-hvac-equipment-pad-36-x-42-x-3","title":"DiversiTech L3642-3 – Concrete HVAC Equipment Pad 36\" x 42\" x 3\"","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eDiversiTech L3642-3 – Concrete HVAC Equipment Pad 36\" x 42\" x 3\"\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eDiversiTech L3642-3\u003c\/strong\u003e is a heavy-duty, fiber-reinforced concrete equipment pad designed to provide a stable, level foundation for residential and commercial outdoor condensing units. As the primary base for your cooling system, this pad protects the unit from ground moisture, prevents \"sinking\" into soft soil, and maintains the structural integrity of the refrigerant line sets by preventing shifting. [\u003ca rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.diversitech.com\/ultralite-pad-36x42x3#:~:text=UC%2036inx42inx3in%20Concrete%20Equipment%20Pad%0A%0AUltraLite%C2%AE%20is%20strengthened,inner%20core%20provide%20flexibility%20and%20vibration%20dampening.\" target=\"_blank\"\u003e1\u003c\/a\u003e]\u003c\/p\u003e\n\u003cp\u003eEngineered for extreme durability, this \u003cstrong\u003e3-inch thick\u003c\/strong\u003e pad features a high-strength concrete mix reinforced with alkali-resistant fibers to prevent cracking and spalling over time. Being a \u003cstrong\u003eGenuine DiversiTech\u003c\/strong\u003e product, it is designed to withstand harsh UV exposure and freeze-thaw cycles better than standard poured concrete. Its textured surface provides excellent grip, ensuring that the condenser remains in place without the need for additional vibration isolation in many standard installations. [\u003ca rel=\"noopener noreferrer nofollow\" href=\"https:\/\/advantage-supply.com\/products\/diversitech-condensing-unit-pad-16-in-x-36-in-x-3-in-lightweight-concrete\" target=\"_blank\"\u003e1\u003c\/a\u003e, \u003ca rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.supplyhouse.com\/DiversiTech-3636-2-2-CladLite-Equipment-Pad-36-x-36#:~:text=DiversiTech%203636%2D2%20%2D%202%22%20CladLite%20Equipment%20Pad%2C,engineered%20encapsulated%20polystyrene%20(EPS)%20core%20is%20virtually\" target=\"_blank\"\u003e2\u003c\/a\u003e]\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFiber-Reinforced Strength:\u003c\/strong\u003e Infused with structural fibers to provide superior tensile strength and prevent cracking under the weight of large 3 to 5-ton units.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGround Moisture Barrier:\u003c\/strong\u003e Elevates the equipment 3 inches above the grade to prevent base pan corrosion and debris accumulation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVibration Damping:\u003c\/strong\u003e The dense concrete composition naturally absorbs mechanical resonance, reducing noise transfer to the home’s structure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeather-Resistant Finish:\u003c\/strong\u003e Designed to resist chipping and weathering in all climates, ensuring a professional look for the life of the HVAC system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e L3642-3 (Item: 36423)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e DiversiTech (Genuine Equipment Pad)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e Concrete Condenser Pad\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36\" Width x 42\" Length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 3 Inches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiber-Reinforced Concrete\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 152.0 lbs (Note: Requires LTL freight or local pickup due to weight) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The \"Level Base\" Secret\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e Before dropping this 152-lb pad into place, always excavate 2-3 inches of topsoil and replace it with a compacted bed of crushed stone or leveling sand. This prevents the pad from tilting over time due to soil erosion. A perfectly level pad ensures proper oil return to the compressor and prevents the fan blade from becoming unbalanced due to a slanted cabinet.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe L3642-3 is a direct replacement or alternative for the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOEM\/MFG Numbers:\u003c\/strong\u003e 3642-3, L36423, 10731\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAlternative Brands:\u003c\/strong\u003e Ultralite (Lightweight alternative), Elite (Plastic alternative)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLarge Footprint Units:\u003c\/strong\u003e Compatible with Trane\/American Standard 4-5 Ton Enclosures (4TTX, 4TTV, 4TWX).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCommercial Applications:\u003c\/strong\u003e Fits Lennox, Carrier, and Goodman large-chassis residential and light commercial condensers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DiversiTech","offers":[{"title":"Default Title","offer_id":52451526574443,"sku":"095247077922","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/original_98fd854e-92c8-4c4f-8eb5-eaee09949821.png?v=1760124584"},{"product_id":"zebra-instruments-3-amp-blade-type-automotive-control-fuses-25-pack","title":"Zebra Instruments – 3 Amp Blade Type Automotive Control Fuses (25 Pack)","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eZebra Instruments – 3 Amp Blade Type Automotive Control Fuses (25 Pack)\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThis \u003cstrong\u003e25-pack of Zebra Instruments 3-Amp fuses\u003c\/strong\u003e provides a bulk supply of essential protection for modern HVAC control boards and low-voltage circuits. These automotive-style (ATO\/ATC) blade fuses are the industry standard for safeguarding 24V transformers and integrated furnace controllers (IFC) against overcurrent caused by short circuits. By acting as a sacrificial link, these fuses prevent expensive damage to the system's primary control board or transformer when an electrical fault occurs.\u003c\/p\u003e\n\u003cp\u003ePrecision-engineered for the HVAC trade, these fuses are designed to \"blow\" instantly upon reaching a 3-amp load, protecting delicate microprocessor-based components. The \u003cstrong\u003ebulk 25-piece pack\u003c\/strong\u003e is a staple for service technicians, ensuring you always have a replacement on hand during the diagnostic process. Each fuse features a transparent housing for quick visual troubleshooting, allowing you to see if the internal element has melted without needing a multimeter for every check.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Value Protection:\u003c\/strong\u003e Specifically rated at 3 Amps to match the safety requirements of most standard residential furnace and air handler control boards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast-Acting Response:\u003c\/strong\u003e Engineered to trip immediately, shielding expensive system components from the heat generated by a low-voltage short.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClear Diagnostic Window:\u003c\/strong\u003e The transparent plastic body allows for instant confirmation of a blown fuse during high-speed troubleshooting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndustry Standard Fit:\u003c\/strong\u003e Universal ATO\/ATC blade design ensures compatibility with nearly every major HVAC equipment brand.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Zebra Instruments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e Blade Type Automotive Fuse (ATO\/ATC)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25-Pack (Bulk Contractor Bag)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAmperage:\u003c\/strong\u003e 3 Amp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e Up to 32V (Ideal for 24VAC control systems)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eColor-Code:\u003c\/strong\u003e Violet \/ Purple (Industry Standard for 3A)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e Zinc Alloy Blade\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The \"Purple\" Rule\u003c\/strong\u003e The 3-amp fuse is the standard for many boards, yet it is often replaced by mistake with a 5-amp (Tan) fuse. Never \"up-size\" the fuse to stop it from blowing. If a 3-amp fuse continues to pop, check the contactor coil for a short or look for a thermostat wire that has rubbed against the copper suction line. Using a higher-rated fuse can allow enough current to flow to melt the traces on your control board before the fuse actually blows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e These 3-Amp fuses are direct replacements for the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLittelfuse:\u003c\/strong\u003e 257003\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBussmann:\u003c\/strong\u003e ATC-3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEquipment Brands:\u003c\/strong\u003e Carrier, Bryant, Payne, Trane, American Standard, Lennox, Goodman, and Rheem\/Ruud.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Application:\u003c\/strong\u003e Fits any HVAC control board, zone controller, or low-voltage transformer circuit utilizing standard automotive blade fuses.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zebra","offers":[{"title":"Default Title","offer_id":52451527197035,"sku":"768467300230","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/ZEBRAFuses_3Amp_BladeType_Automotive_25Pack.png?v=1768671863"},{"product_id":"zebra-zs-1-fuse-single-5-amp-hvac-component-protector","title":"Zebra ZS-1 – Fuse Single 5 Amp HVAC Component Protector","description":"\u003ch1 data-pm-slice=\"1 3 []\"\u003eZebra ZS-1 – Fuse Single 5 Amp HVAC Component Protector\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003eThe \u003cstrong\u003eZebra ZS-1\u003c\/strong\u003e is a specialized 5-amp fast-acting fuse designed specifically for the protection of low-voltage HVAC control circuits. In any modern air handler or furnace, the 24V transformer is vulnerable to short circuits caused by pinched thermostat wires, failing contactor coils, or grounded safety switches. This 5-amp fuse serves as a critical sacrificial link, blowing instantly to disconnect power and prevent the expensive primary transformer or integrated control board from melting down.\u003c\/p\u003e\n\u003cp\u003eEngineered for precision and rapid response, this single 5-amp fuse is a standard replacement for the \"automotive style\" blade fuses found on most modern integrated furnace controllers (IFC). Being a genuine \u003cstrong\u003eZebra Instruments\u003c\/strong\u003e component, it meets the exact amperage-to-thermal-load ratios required to safeguard sensitive microprocessor-based boards. Carrying a spare is essential for any diagnostic call, as a blown fuse is the most common symptom of a low-voltage electrical fault.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features and Function:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast-Acting Protection:\u003c\/strong\u003e Designed to trip immediately upon sensing an overcurrent of 5 amps, shielding delicate control board traces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eColor-Coded Identification:\u003c\/strong\u003e Features the industry-standard Tan\/Orange color coding for 5-amp fuses, allowing for quick visual verification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent Housing:\u003c\/strong\u003e The clear-view window allows a technician to instantly confirm a \"blown\" status without needing a multimeter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e Fits standard ATO\/ATC fuse slots used by Carrier, Goodman, Lennox, and Trane equipment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Details and Key Specifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e ZS-1 (Single Fuse)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Zebra Instruments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e Low-Voltage Control Fuse (ATO\/ATC Style)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAmperage:\u003c\/strong\u003e 5 Amp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 32V Max (Typical for 24VAC HVAC Circuits)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBody Material:\u003c\/strong\u003e High-Temperature Plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Zinc Alloy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.01 lbs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cstrong\u003e🛠️ HVAC Depot Pro Tip: The \"Short Search\" Method\u003c\/strong\u003e .\u003c\/h2\u003e\n\u003cp\u003eIf you find this 5-amp fuse blown, do not simply replace it and turn the power back on. Most 5-amp fuses blow because of a grounded contactor coil or a wire rubbed raw against the cabinet. Replacing the fuse without finding the short will result in an immediate second blown fuse and wasted repair time. Always check for 24V shorts before inserting the new fuse.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCross-Reference \u0026amp; Compatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Zebra 5-Amp fuse is a direct replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLittelfuse:\u003c\/strong\u003e 0257005.PXPV\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBussmann:\u003c\/strong\u003e ATC-5\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Brands:\u003c\/strong\u003e Used on control boards for Carrier, Bryant, Payne, York, Goodman, and Rheem.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eExtensive Model Compatibility List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Low-Voltage Use:\u003c\/strong\u003e Compatible with any furnace, air handler, or package unit using an automotive-style 5-amp blade fuse on the control board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zebra","offers":[{"title":"Default Title","offer_id":52451527262571,"sku":"768467300155","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/82231.jpg?v=1760127566"},{"product_id":"lennox-16u85-suction-line-service-valve-genuine-oem-7-8-x-7-8-hvac-service-valve","title":"Lennox 16U85 Suction Line Service Valve – Genuine OEM 7\/8\" x 7\/8\" HVAC Service Valve","description":"\u003ch1 data-section-id=\"htlp0b\" data-start=\"0\" data-end=\"88\"\u003eLennox 16U85 Suction Line Service Valve – Genuine OEM 7\/8\" x 7\/8\" HVAC Service Valve\u003c\/h1\u003e\n\u003cp data-start=\"90\" data-end=\"503\"\u003eThe Lennox 16U85 Suction Line Service Valve is a genuine OEM refrigerant service valve engineered for reliable refrigerant flow control and HVAC system servicing in residential and light commercial air conditioning and heat pump systems. Designed with 7\/8\" x 7\/8\" connections, this suction line service valve allows technicians to isolate, charge, evacuate, and service refrigerant systems safely and efficiently.\u003c\/p\u003e\n\u003cp data-start=\"505\" data-end=\"817\"\u003eBuilt to OEM specifications for precise fitment and dependable sealing performance, the 16U85 suction service valve provides leak-resistant refrigerant control and reliable HVAC servicing access. Its heavy-duty brass construction supports long-lasting operation under demanding refrigeration and HVAC conditions.\u003c\/p\u003e\n\u003chr data-start=\"819\" data-end=\"822\"\u003e\n\u003ch2 data-section-id=\"1ybcqkm\" data-start=\"824\" data-end=\"853\"\u003eKey Features and Function:\u003c\/h2\u003e\n\u003cp data-start=\"855\" data-end=\"1229\"\u003e• \u003cstrong data-start=\"857\" data-end=\"900\"\u003eSuction Line Refrigerant Service Access\u003c\/strong\u003e – Allows charging, evacuation, and refrigerant isolation\u003cbr data-start=\"957\" data-end=\"960\"\u003e• \u003cstrong data-start=\"962\" data-end=\"991\"\u003eGenuine OEM Compatibility\u003c\/strong\u003e – Designed specifically for Lennox HVAC systems\u003cbr data-start=\"1039\" data-end=\"1042\"\u003e• \u003cstrong data-start=\"1044\" data-end=\"1075\"\u003e7\/8\" x 7\/8\" Connection Size\u003c\/strong\u003e – Compatible with designated suction line applications\u003cbr data-start=\"1130\" data-end=\"1133\"\u003e• \u003cstrong data-start=\"1135\" data-end=\"1168\"\u003eHeavy-Duty Valve Construction\u003c\/strong\u003e – Engineered for reliable sealing and long-term durability\u003c\/p\u003e\n\u003chr data-start=\"1231\" data-end=\"1234\"\u003e\n\u003ch2 data-section-id=\"1x3ymsk\" data-start=\"1236\" data-end=\"1278\"\u003eProduct Details and Key Specifications:\u003c\/h2\u003e\n\u003cp data-start=\"1280\" data-end=\"1793\"\u003e• \u003cstrong data-start=\"1282\" data-end=\"1298\"\u003ePart Number:\u003c\/strong\u003e 16U85\u003cbr data-start=\"1304\" data-end=\"1307\"\u003e• \u003cstrong data-start=\"1309\" data-end=\"1338\"\u003eManufacturer Part Number:\u003c\/strong\u003e 102831-10\u003cbr data-start=\"1348\" data-end=\"1351\"\u003e• \u003cstrong data-start=\"1353\" data-end=\"1370\"\u003eManufacturer:\u003c\/strong\u003e Lennox (Genuine OEM)\u003cbr data-start=\"1391\" data-end=\"1394\"\u003e• \u003cstrong data-start=\"1396\" data-end=\"1410\"\u003ePart Type:\u003c\/strong\u003e Suction Line Service Valve\u003cbr data-start=\"1437\" data-end=\"1440\"\u003e• \u003cstrong data-start=\"1442\" data-end=\"1462\"\u003eConnection Size:\u003c\/strong\u003e 7\/8\" x 7\/8\"\u003cbr data-start=\"1474\" data-end=\"1477\"\u003e• \u003cstrong data-start=\"1479\" data-end=\"1495\"\u003eApplication:\u003c\/strong\u003e Air Conditioner \u0026amp; Heat Pump Refrigerant Systems\u003cbr data-start=\"1543\" data-end=\"1546\"\u003e• \u003cstrong data-start=\"1548\" data-end=\"1561\"\u003eFunction:\u003c\/strong\u003e Refrigerant Service Isolation \u0026amp; Access\u003cbr data-start=\"1600\" data-end=\"1603\"\u003e• \u003cstrong data-start=\"1605\" data-end=\"1627\"\u003eInstallation Type:\u003c\/strong\u003e Brazed Refrigerant Line Connection\u003cbr data-start=\"1662\" data-end=\"1665\"\u003e• \u003cstrong data-start=\"1667\" data-end=\"1689\"\u003eCompatible Brands:\u003c\/strong\u003e Lennox\u003cbr data-start=\"1696\" data-end=\"1699\"\u003e• \u003cstrong data-start=\"1701\" data-end=\"1718\"\u003eConstruction:\u003c\/strong\u003e Heavy-Duty Brass Valve Assembly\u003cbr data-start=\"1750\" data-end=\"1753\"\u003e• \u003cstrong data-start=\"1755\" data-end=\"1775\"\u003eShipping Weight:\u003c\/strong\u003e Approx. 1-3 lbs\u003c\/p\u003e\n\u003chr data-start=\"1795\" data-end=\"1798\"\u003e\n\u003ch2 data-section-id=\"iyctl\" data-start=\"1800\" data-end=\"1859\"\u003e🛠️ HVAC Depot Pro Tip: Protect the Valve During Brazing\u003c\/h2\u003e\n\u003cp data-start=\"1861\" data-end=\"2137\"\u003eAlways wrap the valve body with a wet rag or use heat-blocking putty during brazing to prevent overheating internal seals. Excessive heat can damage valve seats and create refrigerant leaks after startup. Pressure-test the system thoroughly after installation before charging.\u003c\/p\u003e\n\u003chr data-start=\"2139\" data-end=\"2142\"\u003e\n\u003ch2 data-section-id=\"1rctmzz\" data-start=\"2144\" data-end=\"2179\"\u003eCross-Reference \u0026amp; Compatibility:\u003c\/h2\u003e\n\u003cp data-start=\"2181\" data-end=\"2257\"\u003eThe Lennox 16U85 is a direct OEM replacement for the following applications:\u003c\/p\u003e\n\u003cp data-start=\"2259\" data-end=\"2443\"\u003e• \u003cstrong data-start=\"2261\" data-end=\"2277\"\u003eOEM Numbers:\u003c\/strong\u003e 16U85, 102831-10\u003cbr data-start=\"2294\" data-end=\"2297\"\u003e• \u003cstrong data-start=\"2299\" data-end=\"2321\"\u003eCompatible Brands:\u003c\/strong\u003e Lennox\u003cbr data-start=\"2328\" data-end=\"2331\"\u003e• \u003cstrong data-start=\"2333\" data-end=\"2354\"\u003eApplication Type:\u003c\/strong\u003e Suction Line Service Valves\u003cbr data-start=\"2382\" data-end=\"2385\"\u003e• \u003cstrong data-start=\"2387\" data-end=\"2403\"\u003eValve Style:\u003c\/strong\u003e 7\/8\" x 7\/8\" Refrigerant Service Valve\u003c\/p\u003e\n\u003chr data-start=\"2445\" data-end=\"2448\"\u003e\n\u003ch2 data-section-id=\"9l9x9z\" data-start=\"2450\" data-end=\"2488\"\u003eExtensive Model Compatibility List:\u003c\/h2\u003e\n\u003ch3 data-section-id=\"1l4558u\" data-start=\"2490\" data-end=\"2525\"\u003eCompatible Lennox HVAC Systems:\u003c\/h3\u003e\n\u003cp data-start=\"2527\" data-end=\"2841\"\u003e• XC Series Air Conditioners\u003cbr data-start=\"2555\" data-end=\"2558\"\u003e• XP Series Heat Pumps\u003cbr data-start=\"2580\" data-end=\"2583\"\u003e• Elite Series Condensing Units\u003cbr data-start=\"2614\" data-end=\"2617\"\u003e• Merit Series HVAC Systems\u003cbr data-start=\"2644\" data-end=\"2647\"\u003e• Residential Split-System Air Conditioners\u003cbr data-start=\"2690\" data-end=\"2693\"\u003e• Residential Heat Pump Systems\u003cbr data-start=\"2724\" data-end=\"2727\"\u003e• Commercial Condensing Units\u003cbr data-start=\"2756\" data-end=\"2759\"\u003e• Refrigerant Suction Line Applications\u003cbr data-start=\"2798\" data-end=\"2801\"\u003e• Select Lennox Outdoor HVAC Equipment\u003c\/p\u003e\n\u003cp data-start=\"2843\" data-end=\"2933\"\u003e\u003cem data-start=\"2843\" data-end=\"2933\"\u003eAlways verify line size, refrigerant compatibility, and connection type before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lennox","offers":[{"title":"Default Title","offer_id":53305397936491,"sku":"66255153497","price":180.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/16u85.jpg?v=1779918751"},{"product_id":"ek-163s-liquid-line-filter-drier-genuine-oem-16-cu-in-3-8-odf-solder-filter-drier","title":"EK-163S Liquid Line Filter Drier – Genuine OEM 16 cu in 3\/8\" ODF Solder Filter Drier","description":"\u003cp data-start=\"98\" data-end=\"528\"\u003eThe Emerson EK-163S Liquid Line Filter Drier is a genuine OEM refrigerant filter drier engineered to protect residential and light commercial HVAC systems from moisture, acids, and solid contaminants. Designed with a 16 cubic inch capacity and 3\/8\" ODF solder connections, this liquid line filter drier helps maintain clean refrigerant flow and supports long-term compressor reliability in air conditioning and heat pump systems.\u003c\/p\u003e\n\u003cp data-start=\"530\" data-end=\"926\"\u003eBuilt for dependable HVAC system protection, the EK-163S utilizes premium compacted bead technology with advanced filtration capabilities to remove harmful contaminants before they can damage critical refrigeration components. Its heavy-duty steel construction and solder connection design provide reliable leak-resistant installation and long-lasting performance in demanding HVAC applications.\u003c\/p\u003e\n\u003chr data-start=\"928\" data-end=\"931\"\u003e\n\u003ch2 data-section-id=\"1ybcqkm\" data-start=\"933\" data-end=\"962\"\u003eKey Features and Function:\u003c\/h2\u003e\n\u003cp data-start=\"964\" data-end=\"1334\"\u003e• \u003cstrong data-start=\"966\" data-end=\"1004\"\u003eMoisture \u0026amp; Acid Removal Protection\u003c\/strong\u003e – Helps prevent compressor and refrigerant system damage\u003cbr data-start=\"1061\" data-end=\"1064\"\u003e• \u003cstrong data-start=\"1066\" data-end=\"1092\"\u003e16 Cubic Inch Capacity\u003c\/strong\u003e – Designed for HVAC systems up to approximately 4.8 tons\u003cbr data-start=\"1149\" data-end=\"1152\"\u003e• \u003cstrong data-start=\"1154\" data-end=\"1185\"\u003e3\/8\" ODF Solder Connections\u003c\/strong\u003e – Provides secure refrigerant line installation\u003cbr data-start=\"1233\" data-end=\"1236\"\u003e• \u003cstrong data-start=\"1238\" data-end=\"1277\"\u003eHeavy-Duty Refrigeration Filtration\u003c\/strong\u003e – Removes contaminants and improves system reliability\u003c\/p\u003e\n\u003chr data-start=\"1336\" data-end=\"1339\"\u003e\n\u003ch2 data-section-id=\"1x3ymsk\" data-start=\"1341\" data-end=\"1383\"\u003eProduct Details and Key Specifications:\u003c\/h2\u003e\n\u003cp data-start=\"1385\" data-end=\"1938\"\u003e• \u003cstrong data-start=\"1387\" data-end=\"1403\"\u003ePart Number:\u003c\/strong\u003e EK-163S\u003cbr data-start=\"1411\" data-end=\"1414\"\u003e• \u003cstrong data-start=\"1416\" data-end=\"1435\"\u003eCatalog Number:\u003c\/strong\u003e 55C88\u003cbr data-start=\"1441\" data-end=\"1444\"\u003e• \u003cstrong data-start=\"1446\" data-end=\"1463\"\u003eManufacturer:\u003c\/strong\u003e Emerson\u003cbr data-start=\"1471\" data-end=\"1474\"\u003e• \u003cstrong data-start=\"1476\" data-end=\"1490\"\u003ePart Type:\u003c\/strong\u003e Liquid Line Filter Drier\u003cbr data-start=\"1515\" data-end=\"1518\"\u003e• \u003cstrong data-start=\"1520\" data-end=\"1533\"\u003eCapacity:\u003c\/strong\u003e 16 Cubic Inches\u003cbr data-start=\"1549\" data-end=\"1552\"\u003e• \u003cstrong data-start=\"1554\" data-end=\"1574\"\u003eConnection Type:\u003c\/strong\u003e 3\/8\" ODF Solder\u003cbr data-start=\"1590\" data-end=\"1593\"\u003e• \u003cstrong data-start=\"1595\" data-end=\"1615\"\u003eSystem Capacity:\u003c\/strong\u003e Up to 4.8 Tons\u003cbr data-start=\"1630\" data-end=\"1633\"\u003e• \u003cstrong data-start=\"1635\" data-end=\"1651\"\u003eApplication:\u003c\/strong\u003e Air Conditioning \u0026amp; Heat Pump Refrigerant Systems\u003cbr data-start=\"1700\" data-end=\"1703\"\u003e• \u003cstrong data-start=\"1705\" data-end=\"1718\"\u003eFunction:\u003c\/strong\u003e Removes Moisture, Acids \u0026amp; Contaminants from Refrigerant\u003cbr data-start=\"1774\" data-end=\"1777\"\u003e• \u003cstrong data-start=\"1779\" data-end=\"1809\"\u003eRefrigerant Compatibility:\u003c\/strong\u003e Compatible with Common HVAC Refrigerants\u003cbr data-start=\"1850\" data-end=\"1853\"\u003e• \u003cstrong data-start=\"1855\" data-end=\"1872\"\u003eConstruction:\u003c\/strong\u003e Heavy-Duty Steel Shell\u003cbr data-start=\"1895\" data-end=\"1898\"\u003e• \u003cstrong data-start=\"1900\" data-end=\"1920\"\u003eShipping Weight:\u003c\/strong\u003e Approx. 1-3 lbs\u003c\/p\u003e\n\u003chr data-start=\"1940\" data-end=\"1943\"\u003e\n\u003ch2 data-section-id=\"ald5po\" data-start=\"1945\" data-end=\"2030\"\u003e🛠️ HVAC Depot Pro Tip: Always Replace the Filter Drier After a Compressor Burnout\u003c\/h2\u003e\n\u003cp data-start=\"2032\" data-end=\"2345\"\u003eAnytime a compressor fails or the refrigerant system is opened for major repairs, always replace the liquid line filter drier. Moisture and acid contamination left in the system can quickly damage a replacement compressor and reduce overall system lifespan. Always pull a deep vacuum before recharging the system.\u003c\/p\u003e\n\u003chr data-start=\"2347\" data-end=\"2350\"\u003e\n\u003ch2 data-section-id=\"1rctmzz\" data-start=\"2352\" data-end=\"2387\"\u003eCross-Reference \u0026amp; Compatibility:\u003c\/h2\u003e\n\u003cp data-start=\"2389\" data-end=\"2464\"\u003eThe Emerson EK-163S is a direct replacement for the following applications:\u003c\/p\u003e\n\u003cp data-start=\"2466\" data-end=\"2710\"\u003e• \u003cstrong data-start=\"2468\" data-end=\"2484\"\u003eOEM Numbers:\u003c\/strong\u003e EK-163S\u003cbr data-start=\"2492\" data-end=\"2495\"\u003e• \u003cstrong data-start=\"2497\" data-end=\"2516\"\u003eCatalog Number:\u003c\/strong\u003e 55C88\u003cbr data-start=\"2522\" data-end=\"2525\"\u003e• \u003cstrong data-start=\"2527\" data-end=\"2549\"\u003eCompatible Brands:\u003c\/strong\u003e Emerson, Copeland, Universal HVAC Applications\u003cbr data-start=\"2596\" data-end=\"2599\"\u003e• \u003cstrong data-start=\"2601\" data-end=\"2622\"\u003eApplication Type:\u003c\/strong\u003e Liquid Line Refrigerant Filter Driers\u003cbr data-start=\"2660\" data-end=\"2663\"\u003e• \u003cstrong data-start=\"2665\" data-end=\"2686\"\u003eConnection Style:\u003c\/strong\u003e 3\/8\" ODF Sweat\/Solder\u003c\/p\u003e\n\u003chr data-start=\"2712\" data-end=\"2715\"\u003e\n\u003ch2 data-section-id=\"9l9x9z\" data-start=\"2717\" data-end=\"2755\"\u003eExtensive Model Compatibility List:\u003c\/h2\u003e\n\u003ch3 data-section-id=\"snpkkv\" data-start=\"2757\" data-end=\"2790\"\u003eCompatible HVAC Applications:\u003c\/h3\u003e\n\u003cp data-start=\"2792\" data-end=\"3090\"\u003e• Residential Air Conditioning Systems\u003cbr data-start=\"2830\" data-end=\"2833\"\u003e• Heat Pump Systems\u003cbr data-start=\"2852\" data-end=\"2855\"\u003e• Split-System Condensers\u003cbr data-start=\"2880\" data-end=\"2883\"\u003e• Refrigeration Systems\u003cbr data-start=\"2906\" data-end=\"2909\"\u003e• Residential Condensing Units\u003cbr data-start=\"2939\" data-end=\"2942\"\u003e• Commercial HVAC Applications\u003cbr data-start=\"2972\" data-end=\"2975\"\u003e• Compressor Protection Systems\u003cbr data-start=\"3006\" data-end=\"3009\"\u003e• Liquid Line Refrigerant Applications\u003cbr data-start=\"3047\" data-end=\"3050\"\u003e• Universal HVAC Refrigeration Systems\u003c\/p\u003e\n\u003cp data-start=\"3092\" data-end=\"3195\"\u003e\u003cem data-start=\"3092\" data-end=\"3195\"\u003eAlways verify refrigerant line size, tonnage capacity, and refrigerant compatibility before ordering.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lennox","offers":[{"title":"Default Title","offer_id":53305440993643,"sku":"EK-163S","price":71.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0922\/9683\/9531\/files\/EK-163S.jpg?v=1779919263"}],"url":"https:\/\/tophvacparts.com\/collections\/hvac-installation-materials.oembed?page=3","provider":"HVAC Parts and Equipment Depot","version":"1.0","type":"link"}